Topside Controls (Control Buttons)

Overlay sticker for the Balboa TP700 topside controls that have three pumps. The buttons on this overlay are marked as Jet, Jet2, Jet 3, Light, Aux on the left and 4 directional keys and program button on the right. Manufacturer Balboa Water...

Overlay sticker for the Balboa TP700 topside controls that have two pumps. The buttons on this overlay are marked as Jet, Jet2, Light, Aux on the left and 4 directional keys and program button on the right. Manufacturer Balboa Water...

Balboa TP700 base topside control panel with color LCD screen and no overlay. This feature rich topside control has 11 buttons, but your current model may show less buttons. This is due to the overlay sticker used by your manufacturer covering some of...

No longer available and there is no replacement. You would need to replace your spa pack with a retro-fit control system like this: Retrofit Base Control, Balboa BPBEE, (1) or (2) Pump with 4.0kW Heater, TP200T 4 Button crescent shaped ECO-1 topside...

This part is a bare Balboa 6 Button VL600 Topside for a Two Pump system with Light System. The VL600S topside control measures 7" x 3-7/16" and has a 7 foot cable with a phone jack style RJ45 plug. The overlay sticker for this topside control panel is...

In.K500 7 button topside control panel for use with the Gecko In.Xe, In.Ye, In.Xm spa packs and controls. This topside control has a colored LCD screen and feature rich menu comparable to more expensive units. The topside measures 7-1/8" x 3-5/16" and...

Transformer for Sundance and Jacuzzi based LX circuit boards. This 115/230 volt transformer has a step down voltage of 12 Volts. The purpose of this transformer is to energize the circuit board to power low voltage items like the processor, relay coils,...

This oval topside control is no longer available. We have a replacement option that is a crescent shape rather than oval that takes the same hole size here: Hydroquip / Gecko ECO-1 Crescent Shaped 4 Button Topside Control Panel ECO-1 oval replacement...

Balboa BPBEE Control System with 4.0kW Remote Heater and TP200T Panel. Includes Blackout Plate, Hang Mounts, Topside and Light Wire..  You would reuse your amp cables for pumps and blowers.. If your original control used cords other than Amp Cables...

This part is a Raindance E2 2 Button Overlay for a 4-1/16" x 1-13/16" Rectangle Topside.          The button configuration of Light/Jet and Temp.   Make sure your old topside does not have a raise area for...

This part is a Raindance E4 3 Button Overlay for a 6-3/8" x 2-1/4" Rectangle Topside.          The button configuration of Jet, Temp and Light left to right.     This Overlay can be used to replace your...

Balboa BPBEE Control System with 4.0kW Heater and TP200T Panel. Includes, Blackout Plate, Topside and Light Wire..   This system is compact and will run 1 or 2 Jet pumps or 1 Pump and a Blower and a Light..    You would reuse your amp...