Tool, Pool Tool, Impeller Wedge, 48fr
- SKU:
- HTP99-361-1160
- Shipping:
- Calculated at Checkout
Related Products
Tool,Pool Tool,Handrail Stabilizing Plug,Carbon Fiber,1.9"
MSRP:
$41.49
$32.27
Anchor type handrails are often crushed at the end by the underground anchor causing the handrail to loosen and become unstable. When hammered into the crushed end of the handrail, the Handrail...
Tool,Pool Tool,Handrail Stabilizing Plug,Carbon Fiber,1.875"
MSRP:
$41.49
$32.27
Anchor type handrails are often crushed at the end by the underground anchor causing the handrail to loosen and become unstable. When hammered into the crushed end of the handrail, the Handrail...
Impeller, Jacuzzi, J Pump, 1.0hp, 48FR, J Series, JCM Series, K Series, KM Series
MSRP:
$59.99
$49.99
This part is a Impeller, Jacuzzi, J Pump, 1.0hp, 48FR, J Series, JCM Series, K Series, KM Series..
This is found on a Wet End that has a face like I show in the Pho
Impeller, Pentair Sta-Rite DuraGlas II, MaxEPro, 1.5hp, Pool Pump
MSRP:
$109.99
$89.99
StaRite/Pentair Dura-Glas II/MaxEPro Pump Impeller for a 1.5HP Pool Pump... Please check your impeller against the measurements below..Closed face impeller made for the Dura-Glas II and MaxEPro pool...
Tool, Cutter, Vinyl and Hose, 2"
MSRP:
$46.17
$34.99
Vinyl Tubing Cutter
Tool Type Group PlumbingTool Type Tubing CutterTool Application TubingManufacturer Generic
Faceplate, Waterway Executive or Workman, 48fr or 56fr, 2"
MSRP:
$69.99
$59.99
This parts is an Executive 2" Threaded Face plate assembly (Which will measure about 3" Across the Threads) less the O-rings, Screws, Bleeder Plugs and other hardware needed to attac
Wet End, Vico, Ultima, 2.0hp, 2"mbt, 48fr
MSRP:
$209.99
$139.99
This item is a 48 Frame Vico Wet End with 2" x 2" inlet and outlet that would measure about 3" across the threads and it has a 2.0HP impeller which would fit a motor that has 10.0 amps at 230V and 16...
AMP Style Connector Tool for Pin Removal
MSRP:
$64.99
$42.99
AMP Style Connector Part/Tool
This pin extractor is a plunger style pin extractor for pushing pins out from behind the connector blocks for contact sizes 16-20. 3" long. This Amp style connector...