Spa Hot Tub 56Fr Intertek LX Pumps 2" X 2" 4.0HP 1 Speed 230V WUA Video How To

(1 review) Write a Review
SKU:
ASP56WUA400-I
Shipping:
Calculated at Checkout
  • Spa Hot Tub 56Fr Intertek LX Pumps 2" X 2" 4.0HP 1 Speed 230V WUA Video How To
  • Compare your screws to be sure that this is the correct wet end.
  • Compare your wet end to this picture to be sure that this is the correct wet end.
  • The original pump looks like this...
  • Spa Hot Tub 56Fr Intertek LX Pumps 2" X 2" 4.0HP 1 Speed 230V WUA Video How To 2" Suction Side measures 3" across the threads..
  • Spa Hot Tub 56Fr Intertek LX Pumps 2" X 2" 4.0HP 1 Speed 230V WUA Video How To 2" Pressure Side measures 3" across the threads..
  • Compare your motor shaft to these to be sure...
  • When putting your cord back on the new pump note C= Common or the White Wire, L= Low Speed and is usually the Black Wire and rarely the Red Wire, H=High Speed and is usually the Red Wire but occasionally the Black, Green = Ground or the Green wire. They way you can tell if you have it wired correctly is when you power up the pump should go into Low Speed First. If it goes into High Speed you need to power down and reverse the red & black wires and power back up and verify it goes into Low Speed first. If you leave it wrong it will overheat and damage the Hot Tub especially during warm weather...
  • When putting your cord back on the new pump note C= Common or the White Wire, L= Low Speed and is usually the Black Wire and rarely the Red Wire, H=High Speed and is usually the Red Wire but occasionally the Black, Green = Ground or the Green wire. They way you can tell if you have it wired correctly is when you power up the pump should go into Low Speed First. If it goes into High Speed you need to power down and reverse the red & black wires and power back up and verify it goes into Low Speed first. If you leave it wrong it will overheat and damage the Hot Tub especially during warm weather...
  • Spa Hot Tub 56Fr Intertek LX Pumps 2" X 2" 4.0HP 1 Speed 230V WUA Video How To
  • Spa Hot Tub 56Fr Intertek LX Pumps 2" X 2" 4.0HP 1 Speed 230V WUA Video How To
  • Spa Hot Tub 56Fr Intertek LX Pumps 2" X 2" 4.0HP 1 Speed 230V WUA Video How To
  • Spa Hot Tub 56Fr Intertek LX Pumps 2" X 2" 4.0HP 1 Speed 230V WUA Video How To
  • Spa Hot Tub 56Fr Intertek LX Pumps 2" X 2" 4.0HP 1 Speed 230V WUA Video How To
MSRP: $459.99
$399.99
— You save $60.00

Description

Important NOTE: If you have a 6500-352 6500-363 6500-365, Sundance, Jacuzzi, Dimension One, Thermospa or other brand with a Bracketless pump DO NOT order this one Click here for the Bracketless pump: 56Fr Jacuzzi® Sundance Intertek Baseless Pump 2" X 2" 1 Speed 230V WUA400I 6500-352 6500-363 6500-365


This 4.0 Horse Power 12.0 Amp (1) Speed 56 Frame Complete Pump is a intertek LX Brand Pump. These pumps usually have the part number WUA-400-I, WP-400-I or LP-400-I on the label. Watch the video for instruction on how to Identify this pump and also how to determine if this is the correct pump. It is about 7 1/4"" across the face of the pump, it measures about 7 3/8" from the bottom to the top of the pressure side of the volute, it also measures 15" from the back to front edge. The Suction and Pressure side thread fittings are called 2" x 2" but measure 3" from the edge of the thread to the edge of the thread. 

NOTE: This Pump looks a lot like an Aqua-Flo and a CMP Pump and they will interchange if you replace the entire pump! 

If your original Wet End has a Bleeder Barb and the heads of the Bleeder Screws in your old wet end have a spot for a flat screw driver you will need a new bleeder barb... If the original has a wing nut style you already have the newer style bleeder barb and will only need a new one if your original one breaks..

 

 

img-0842-clipped-rev-1.pngimg-0877-clipped-rev-1.pngimg-0847-clipped-rev-1.png

 

Click this link for the new Style Bleeder Barb: Barbed Bleeder Plug WUA Intertek LX 48 or 56 Frame Wet End Fine Threads

Note: This Pump is a replacement for intertek Chinese LX and LP series Pumps Some Pump Part numbers are as follows: (WUA400-I)  (LP400-I) (400-I)
To Install this pump you will have to loosen the bolts in the bottom holder and the suction and pressure side unions.  Note: We offer parts for this pump and complete pumps in our store. 
Visit our Store as we also offer these and other associated products and accessories for your Spa.

WUA200-II,WUA300-II,WUA400-II,WUA200-I,WUA300-I,WUA400-I,LP200,LP250,LP300,LP150,WP200-II,WP250-II,WP300-II,WP200-I,wp250-I,wp300-I,wp400-I
WUA200,WUA300,WUA400,WUA200,WUA300,WUA400,LP200,LP250,LP300,LP150,WP200,WP250,WP300,WP200,wp250,wp300,wp400,chinese,lx,guangdong,energy saver spa equipment
 
View AllClose

1 Review

  • 5
    100% Happy with everything

    Posted by Dennis on Nov 22nd 2024

    I gave 5 stars because that was the most you can give. The customer tech service was fantastic, in fact it was the best we have ever received from a Hot Tub supplier and we have had hot tubs for 15 + years. The delivery and the price was just as top notch as the tech service was! Thank you!

View AllClose

Related Products