Spa Hot Tub 48Fr Guangdong LX Pump 2" X 2" 1.0HP 2 Speed 115V WUA

(No reviews yet) Write a Review
SKU:
ASP48WUA1001C-II
Shipping:
Calculated at Checkout
  • Spa Hot Tub 48Fr Guangdong LX Pump 2" X 2" 1.0HP 2 Speed 115V WUA
  • Spa Hot Tub 48Fr Guangdong LX Pump 2" X 2" 1.0HP 2 Speed 115V WUA
  • When putting your cord back on the new pump note C= Common or the White Wire, L= Low Speed and is usually the Black Wire and rarely the Red Wire, H=High Speed and is usually the Red Wire but occasionally the Black, Green = Ground or the Green wire. They way you can tell if you have it wired correctly is when you power up the pump should go into Low Speed First. If it goes into High Speed you need to power down and reverse the red & black wires and power back up and verify it goes into Low Speed first. If you leave it wrong it will overheat and damage the Hot Tub especially during warm weather...
  • Spa Hot Tub 48Fr Guangdong LX Pump 2" X 2" 1.0HP 2 Speed 115V WUA 2" Suction Side measures 3" across the threads..
  • Spa Hot Tub 48Fr Guangdong LX Pump 2" X 2" 1.0HP 2 Speed 115V WUA
  • Spa Hot Tub 48Fr Guangdong LX Pump 2" X 2" 1.0HP 2 Speed 115V WUA
  • Spa Hot Tub 48Fr Guangdong LX Pump 2" X 2" 1.0HP 2 Speed 115V WUA
  • Compare your motor shaft to these to be sure...
  • Compare your wet end to this picture to be sure that this is the correct wet end.
  • Compare your screws to be sure that this is the correct wet end.
MSRP: $449.99
$389.99
— You save $60.00

Description

This 1 Horse Power 10.3/3.8 Amp (2) Speed 48 Frame Complete Pump is a Guangdong LX Brand Pump. These pumps usually have the part number 48WUA1001C-II on the label for a Watkins Version. Watch the video for instruction on how to Identify this pump and also how to determine if this is the correct pump. It is about 7 1/4"" across the face of the pump, it measures about 7 3/8" from the bottom to the top of the pressure side of the volute, it also measures 15" from the back to front edge. The Suction and Pressure side thread fittings are called 2" x 2" but measure 3" from the edge of the thread to the edge of the thread. 

NOTE: This Pump looks a lot like an Aqua-Flo and a CMP Pump and they will interchange if you replace the entire pump! Also note make sure you are choosing correctly between the 48 and 56 frame versions this one is a 48 which measures less than 6" across the back of the motor the 56 measures more than 6"..

If your original Wet End has a Bleeder Barb and the heads of the Bleeder Screws in your old wet end have a spot for a flat screw driver you will need a new bleeder barb... If the original has a wing nut style you already have the newer style bleeder barb and will only need a new one if your original one breaks..

 

 

img-0842-clipped-rev-1.pngimg-0877-clipped-rev-1.pngimg-0847-clipped-rev-1.png

 

Click this link for the new Style Bleeder Barb: Barbed Bleeder Plug WUA Intertek LX 48 or 56 Frame Wet End Fine Threads

 

For the Bleeder Barb That fits this pump click Either of these links one is a 1/4" and one is a 1/2":

 

Barbed Bleeder Plug WUA Intertek LX 48 or 56 Frame Wet End Fine Threads

Pump Bleeder Barb, Watkins, Wavemaster, LX, 1/2" Barb x 1/4"Mpt

Note: This Pump is a replacement for Guangdong Chinese LX and LP series Pumps Some Pump Part numbers are as follows: 48WUA1001C-II, intertek
To Install this pump you will have to loosen the bolts in the bottom holder and the suction and pressure side unions.  Note: We offer parts for this pump and complete pumps in our store.
Visit our Store as we also offer these and other associated products and accessories for your Spa.

WUA200-II,WUA300-II,WUA400-II,WUA200-I,WUA300-I,WUA400-I,LP200,LP250,LP300,LP150,WP200-II,WP250-II,WP300-II,WP200-I,wp250-I,wp300-I,wp400-I
WUA200,WUA300,WUA400,WUA200,WUA300,WUA400,LP200,LP250,LP300,LP150,WP200,WP250,WP300,WP200,wp250,wp300,wp400,chinese,lx,guangdong,energy saver spa equipment
 

View AllClose

Related Products