Slo Blo Fuse, 25A,115v, MDA
- SKU:
- HTP60-555-1112
- Shipping:
- Calculated at Checkout
MSRP:
$5.37
Now:
$4.18
Was:
— You save
$1.19
Description
MDA Series Slo Blo Fuse
Ceramic construction for protection of loads to 30 amps
View AllClose
Ceramic construction for protection of loads to 30 amps
Related Products

Slo Blo Fuse, 10A, 115v, MDA
MSRP:
$5.51
Now:
$4.29
Was:
MDA Series Slo Blo FuseCeramic construction for protection of loads to 30 amps

Slo Blo Fuse Ceramic 30A MDA 1/4" x 1 1/4"
MSRP:
$5.37
Now:
$4.18
Was:
This Item is a 30Amp Slo Blo MDA Style Ceramic Fuse that measures 1 1/4" Long x 1/4" Wide and is used on some Hot Tub or Pool Boards. This is a smaller automotive style fuse that does not have glass...

Slo Blo Fuse Ceramic .5A MDA 1/4" x 1 1/8", Circuit Board Fuse
MSRP:
$5.99
Now:
$3.99
Was:
This Item is a Board Fuse .05Amp Slo Blo MDA Style Ceramic Fuse that measures 1 1/8" Long x 1/4" Wide and is used on some Hot Tub or Pool Boards. This is a smaller automotive style fuse that does not...
Slo Blo Fuse 20 Amp MDA Style 1 1/4" x 1/4"
MSRP:
$4.23
Now:
$3.29
Was:
This Item is a 20Amp Slo Blo MDA Style Ceramic Fuse that measures 1 1/4" Long x 1/4" Wide and is used on some Hot Tub or Pool Boards. This is a smaller automotive style fuse that does not have glass...
Time Delay Fuse, 10A, 115v, SC
MSRP:
$13.80
Now:
$10.73
Was:
SC Series Time Delay FuseIdeal for protection of loads subject to high short circuit currents. Protection to 60 amps
Time Delay Fuse, 15A, 115v, SC
MSRP:
$11.17
Now:
$8.69
Was:
SC Series Time Delay FuseIdeal for protection of loads subject to high short circuit currents. Protection to 60 amps

Thermostat, Invensys, 5/16", 12", SPST, 25A
MSRP:
$57.03
Now:
$44.36
Was:
ThermostatsSingle pole rated at 25 amps with max temp rating at 107°F. Best results are obtained when the bulb is installed in a dry well or groove tube at or immediately before the heater. This is a...

Thermostat, Invensys, 1/4", 36", SPST, 25A
MSRP:
$75.03
Now:
$59.95
Was:
Single pole rated thermostat at 25 amps with max temp rating at 107°F. Best results are obtained when the bulb is installed in a dry well or groove tube at or immediately before the heater. This is a...