Seal HotSpring Caldera Watkins Vendor # 3536 Spa Hot Tub Pump Wet End Seal Part LX Pumps 77363

(No reviews yet) Write a Review
SKU:
ASPSEAL-KHWUA3536
Shipping:
Calculated at Checkout
  • Seal HotSpring Caldera Watkins Vendor # 3536 Spa Hot Tub Pump Wet End Seal Part LX Pumps
  • Search your pump motor for this code.. If it is Vendor # 3536 then this is the correct part..
  • Seal HotSpring Caldera Watkins Vendor # 3536 Spa Hot Tub Pump Wet End Seal Part LX Pumps
  • Seal HotSpring Caldera Watkins Vendor # 3536 Spa Hot Tub Pump Wet End Seal Part LX Pumps
  • Seal HotSpring Caldera Watkins Vendor # 3536 Spa Hot Tub Pump Wet End Seal Part LX Pumps
  • Seal HotSpring Caldera Watkins Vendor # 3536 Spa Hot Tub Pump Wet End Seal Part LX Pumps
  • Seal HotSpring Caldera Watkins Vendor # 3536 Spa Hot Tub Pump Wet End Seal Part LX Pumps
  • Seal HotSpring Caldera Watkins Vendor # 3536 Spa Hot Tub Pump Wet End Seal Part LX Pumps
  • Seal HotSpring Caldera Watkins Vendor # 3536 Spa Hot Tub Pump Wet End Seal Part LX Pumps
MSRP: $34.99
$24.99
— You save $10.00

Description


This Seal Set is used ONLY in Watkins HotSpring Caldera Wet Ends where the motor has the Vendor code of 3536. It is 1 39/64" Across the back of the Spring Seal part that goes into the volute or wetend back and the Ceramic & Rubber part that goes into the impeller is 1 11/32". The Hole in the ceramic part is about 3/4" and the hole in the spring side measures about 45/64". 

 
NOTE: Search for Vendor # 3536 on the pump motor label if your has that then this kits is correct..
If yours has other Vendor numbers like 4081, 0108 or 3861 on the label click here: Watkins Pump Parts
 

To Install you should put silicon sealant on the back of the Metal part and gently push it into place with a 1" coupler as the push tool. Also the rubber part can use a light coat of silicon to slide it into place in the impeller. 
We offer these alone, with The Professor's Silly Juice or with an Impeller in a kit so look in our store. Note: We offer this seal with the seal too and silicon, with the seal tool and silicon and bearings or the seal with the seal tool, silicon and an impeller in our store.
 
1000, VG-1000, USSPS1000B, 5250-106, AS-1000, 071734S, PS-1000,319-3100B,waterway, executive, hiflo, hi-flo, wet end, wet end, spa wet end seal , hot tub wet end seal, 1000 seal, p-1000 seal, ps-1000 seal, p 1000 seal, ps 1000 seal
Please note: When you have a seal leaking in most cases you will need an impeller because the leak caused water to get into the metal shaft area that the impeller is screwed onto and expands and damages the impeller. We offer the impellers along with the seal in a kit in our store. Watch the video above for how to install the seal and other repairs for this pump as well.
WUA200-II,WUA300-II,WUA400-II,WUA200-I,WUA300-I,WUA400-I,LP200,LP250,LP300,LP150,WP200-II,WP250-II,WP300-II,WP200-I,wp250-I,wp300-I,wp400-I
WUA200,WUA300,WUA400,WUA200,WUA300,WUA400,LP200,LP250

 

,LP300,LP150,WP200,WP250,WP300,WP200,wp250,wp300,wp400,chinese,lx,guangdong,energy saver spa equipment
 
View AllClose

Related Products