Retrofit Remote Heater Control, 230v, 4.0kW, 4 Button Topside, 2 pumps, Circ, Light

Gecko In.Yj retro-fit control system w/ 4.0 KW remote heater. This unit is an economical retro-fit kit that has a small footprint and fits in tigh spots. The heater can be mounted within 4 feet of the spa pack. You can wire your components to the circuit board direct or you can use the supplied AMP receptacles, but you would then need to purchase power cords if using the receptacles, see below. This system can even be used to replace a models with a remote heater or use the heater in it's factory spot. The system also has multiple possible configurations that can be set through the topside control panel.

Note: This system includes a cable for a 2 speed pump #1 only that is the direct connect style w/ no plug. If you need a 2 speed pump cable with amp plug or the single speed cords with AMP plug for pumps, ozonator or circ they will need to be purchased separately.

Here is a link to the single speed cords with amp plug for this system: Male, Amp, Pump or Blower Cable, (1) Speed, 14 Gage, 3Wire, 60", Black, White, Green

Here is a link to the 2 speed cord with AMP plug: Amp Cord, Pump 1, 2-Speed, 4-Pin Amp, 14/4, 72"Long, Plug Attached, w/Terminated Ends

Operates:
Convertible 120/240V
Pump # 1  = Single / Dual Speed
Pump #2 = Single Speed
Circulation Pump (Only works with either 2 single speed pumps or a 2 speed pump # 1 with no pump 2)
Ozone
4.0KW Heater
12VDC White LED Light