Retrofit MODPACK 202 Low Flow Control Pack, (2) Pump, Blower, Circ Pump, Ozone and 5.5kW, 230v

The MODPACK 202 Low Flow is a universal Low Flow replacement spa control system for (1)Circluation Pump (2) Jet Pumps and Blower System and 12V light. Heater assembly is 15″ long with a 3/4" Barb Connection kit, it is mounted inside of the enclosure.

This pack is designed to run either (1) Pump, (2) Pumps or (2) pumps and (1) Blower, Circ Pump, a Light and an ozonator as well. Each component can be wired 115v or 230V and it comes with a new cable for both pumps, a light and an ozonator.. The topside is 7 1/4" x 3 1/4" on the face and the hole size for the topside would be about 6 3/8" x 2 3/8".. If the hole you are trying to use the topside is is larger than this we offer blackout plates to take up the space.. 

 If you need a blackout plate click here.. Adapter Blackout Plate, Hydro-Quip 8-1/2" x 3-1/2". For Eco-401 or Balboa E4 Duplex Topside

If you need your ModPack to run Fiber Optic add this option.. Retrofit MODPACK Fiber Optic Option This is in Addition to a New Modpack purchase

• Pump One circuit, two speeds, 220V, 12A Max
• Pump Two circuit, up to 2 speeds (When activated), 220V, 12A Max
• Blower circuit, 110/220V, 7A Max
• Circ Pump circuit, 110/220V, 4A Max (24Hr when activated, Requires 25 GPM)
• Ozone circuit, 110/220V, 1A Max
• 12V 12W Light circuit 
• 1.4/5.5KW, 120/240V Flo-Thru heater
• 48-inch amp motor, blower, and ozone cords
• Topside Panel Included
• UL and ETL Listed
• Freeze protection
• High-limit protection
• Filtration mode
• Economy Mode