Retrofit ePACK Control Pack, (2) Pump, Ozone and 4.0kW, 115v or 230v

The ePACK is a universal replacement spa control system that features a water sensor instead of a pressure or flow switch so this pack will work plumbed in the pressure or suction side. Heater assembly is 15″ long, it is mounted to the back of the enclosure.

This pack is designed to run either (1) Pump, (2) Pumps or (1) pump and (1) Blower, a Light and an ozonator as well. It can be wired 115v or 230V and it comes with a new cable for both pumps, a light and an ozonator.. The topside is 5 3/8" x 2 1/2" on the face and the hole size for the topside would be about 4 3/4" x 1 3/4" and comes standard with a 5 foot cable. If you need a longer cable we have extensions below:

Topside Ribbon Cable Extension, ACC, Smartouch and Modpack, 5 Foot

Topside Ribbon Cable Extension, ACC, Smartouch, 10 Foot

If the hole you are trying to use the topside is is larger than this we offer blackout plates to take up the space..click here:  ACC / Modpack Topside Adapter Plate for the KP1000, KP1000DP, KP1005

If you need your ePack to run Fiber Optic add this option.. Retrofit MODPACK Fiber Optic Option This is in Addition to a New Modpack purchase

The ePack controls a 2 speed primary pump, a single speed air blower or a single speed secondary pump, a 12 volt spa light, an auxiliary light  and an ozonator.  This system is convertible and may be run on 120 volts. All circuits are also convertible to 115 or 230 Volts.