Wet End Pump Parts

This Part is a Barbed Bleeder Barb with O-Ring that fits New Style 48 or 56 Frame WUA Intertek LX Brand Pump Wet End that uses a fine thread bleeder plug.. Watch the video for instruction on how to install this part and also how to...

This part is a Volute O-Ring, 6" ID, 3/32" Thick, Vico Ultimax, 48 or 56 Frame...

This Face Plate O-Ring Is 4-3/4" Inside Diameter and is 1/8" Thick. It is found on Aqua-Flo 1 1/2" x 1 1/2" (Which Measures 2 3/8" Outside of the threads on the Sunction and Pressure Side of the Wet End) These Wet Ends used the names Flo-Master,...

This Kit is a 3/8" Tubing Connection Kit for 3/8" Plumbing repairs where you are connecting old 3/8" Clear Tubing that measures about 1/2" OD between a cut air control line and the 3/8" Barb on an Air Manifold or Jet Body Air connection.. The kit...

This part is an Air Bleeder barbed plug and O-Ring for Jacuzzi and Sundance Piranah Pump Faces Only.. Hot Tub Pump Faces to bleed the air off the pump while filling the tub up.  This barb is usually replaced because the barb is broken off and...

This Part is a Set of * Face Plate Screws for Piranha, Thera-Flo or Thera-Max pump faces only. This Part is used mostly in Jacuzzi® and Sundance® hot tubs with this specific type of wet end and will not fit others. For other parts related to this...

This part is a Power Right Wet End Pump Face O-Ring Only fits around the Face of a Power Right Pump Face Generally found on Cal Spaa which has 2" inlet and outlet which measures about 3" across the threads...   Related Parts: Impeller,...

This part is an Jacuzzi J Pump Face O-Ring.. It measures about 5 1/2" ID and has a 3/16" cross section Part Type O-Ring  O Reference Number O-150 Inside Diameter 5-1/2"id Cross Section 3/16" Application...

This part is a Wear Ring that only fits Guangdong LX or LP Impellers for a 48 or 56 Frame Pump Wet Ends and measures 3/4" thick from front to back... WUA Pumps.. Note: When Replacing some original LX Pump faces the wear ring was built into the face....

You are buying an Air Bleeder Mountable Bleeder Fitting with a removable plug, a 1/4" Mpt X 3/8" Barb plug. This style set up is is usually found in Dimension One Hot Tubs in the Filter area and other brands as well.. Note; The plug is not sold...

This O-Ring fits most pump Drain Plugs..  

This Part is a Barbed Bleeder Barb with O-Ring that fits New Style 48 or 56 Frame Intertek LX Brand Pump Wet End that uses a fine thread bleeder plug on Jacuzzi and Sundance Brand Tubs.. Watch the video for instruction on how to install...