Pump Impellers

This Impeller and Seal Kit is used ONLY in a 6500-907 WTC-50M Jacuzzi® Premium or Sundance® Hot Tub Circulation Pump Wet End. The impeller may have the number B432-01, B432-02, B432-03, B432-04, B432-05 on the back. The impeller measures...

This Impeller and Seal Kit is used ONLY in Intertek Impeller & Seal Kit for Circulation Pump, TheraMax II, 1/15hp, 230v, Sundance or Jacuzzi, 02410512-2 or 6500-907 Pumps Only. The impeller may have the number B706-01, B706-02, B706-03, B706-04,...

This Impeller and Seal Kit is used ONLY in Intertek LX 48WTC, 1/8HP, 115 or 230V, WTC0153, Side Discharge Pumps Only. The impeller may have the number B706-01, B706-02, B706-03, B706-04, B706-05 on the back. The impeller measures about 3 5/8" across but...

This Impeller and Seal Kit is used ONLY in Intertek WTC50 Pumps Only. The impeller may have the number B432-01, B432-02, B432-03, B432-04, B432-05 on the back. The impeller measures about 3 5/8" across but the size can vary but this impeller is the...

3.0 HP impeller for the Waterway EX2 pumps assemblies. This impeller is normally found on motors with a 10.7-12.0 amp motor and fits between the Face and the Volute of an EX2 Wet End. I would advise replacing the Seal when you replace the Impeller. The...

This Item is a LX 1.0 Horse Power 12.0-13.0 Amp (1) Speed 48 Frame Complete 1 1/2" Side Discharge Pump found in some Lifesmart Brand Hot Tubs. It may have a Watkins Vendor Code 4081 LX Brand Pump. These pumps usually have the part number 1431501-01 on...

This part is a Complete Wet End for Vendor Code 3536 with pump numbers 1431601-03.  This is for Hot Spring Watkins Pumps 2" X 2" 12Amp 230V Vendor Code 3536 only.   If your pump has 1431601 but no (-03) this is not the correct pump...

Waterway 4 HP Hi-Flo closed faced impeller for Hi-Flo side discharge wetends that have part number 315-1160 on the rear. This impeller will fits motors that have a 230 Volt 12-13 amp rating. The shaft seal for this impeller can be found here Impeller...

This is a 2.5HP Impeller with a 2 1/8" Eye width for a Waterway 48 or 56 Frame Wet End 2.5HP Motor that is about 11.0 Amps on High Speed. This Impeller fits between the Face and the Volute of an Waterway EX2 Wet End which is very rare and odd. I would...

This part is a Complete Wet End for Vendor Code 3536 with pump numbers 39578-03, 0982601-03 or 37066-03. This is a LX Brand Replacement Wet End Pump with a  2" X 2" 2.5HP 230V Vendor Code 3536 only.   It is about 7 1/4"" across the face of the...

This Replacement LX Wet End for 0974101-03 or 0974001-03 1.5HP 48Fr LX Pump 2" X 2" only that would be about 8.0 Amps at 230V Vendor Code 3536..  It is about 7 1/4"" across the face of the pump, it measures about 7 3/8" from the bottom to the top...

This Part is a Complete Wet End, 77773, 36746, 72194, 72197, 2.0HP, 230v, 48 frame, 2" x 2", 8.5A, Vendor Code 4081   This Wet End is a 48Frame 2" x 2" inlet and outlet Wet End that measures about 3" across the threads..   Watkins Does Not...