Waterway Executive 2"x 2" Wet Ends
In this Category you will find Waterway Executive 48 and 56 Frame 2" x 2" Wet Ends where both the Suction" Inlet" and the Outlet "Pressure" Side measure about 3" edge to edge.
The way you can tell if your wet end is 48 or 56 frame you would measure the distance between the holes on the through bolts both in an X pattern and a Square pattern..
A 48 frame Wet End wet end measures about 5 1/8" center to center in an x pattern..
A 56 frame Wet End wet end measures about 5 3/4" center to center in an x pattern..
A 48 frame Wet End wet end measures about 3 5/8" center to center in a square pattern..
A 56 frame Wet End wet end measures about 4 1/8" center to center in a square pattern..
A 2" Threaded fitting measures about 3" edge to edge on the suction or pressure side..
- Product
- Qty in Cart
- Quantity
- Price
- Subtotal
-
Connection Kit, 3/8" Tubing, 1/2" OD, 6" length for Air Systems or Jet Body Air Connections
MSRP: $12.99$6.99This Kit is a 3/8" Tubing Connection Kit for 3/8" Plumbing repairs where you are connecting old 3/8" Clear Tubing that measures about 1/2" OD between a cut air control line and the 3/8" Barb on an Air Manifold or Jet Body Air connection.. The kit...MSRP: $12.99$6.99 -
Pump Air Bleeder 1/4" Mpt X 3/8" Barb with Sealer Fitting Dimension One
MSRP: $29.99$19.99You are buying an Air Bleeder Mountable Bleeder Fitting with a removable plug, a 1/4" Mpt X 3/8" Barb plug. This style set up is is usually found in Dimension One Hot Tubs in the Filter area and other brands as well.. Note; The plug is not sold...MSRP: $29.99$19.99 -
2 5/8" Lip Hot Tub Spa 2" Heater or Pump Union Gasket CMP Video How To
MSRP: $7.99$4.99This Part is (1) NON-Standard 2" Heater or Pump Union Gasket with a 2 5/8" Center to Center Lip. The gasket is 2 7/8" across on the outside the inside diameter is about 2" and the lip that fits into the union is 2 5/8"...MSRP: $7.99$4.99 -
Bleeder Drain Plug & O-Ring , 3/8", Waterway Fits Executive, Viper, Hi- Flo, Iron Might, Spa Flo, Supreme, Mustang, Workman and More
MSRP: $5.99$4.99Drain Plug with O-Ring for Waterway Wet Ends Fits Executive, Viper, Hi- Flo, Iron Might, Spa Flo, Supreme, Mustang, Workman and More We also offer the 3/8" Barb that replaces these plug in the case of using a Pump Bleeder System... This are found...MSRP: $5.99$4.99 -
Barb Bleeder 1/4" Mpt X 3/8" with Silicon Kit for Waterway Pump Fitting
MSRP: $14.99$10.99This kit is anAir Bleeder barbed plug and Silicon sealer usually used on a Waterway Hot Tub Pump Face to bleed the air off the pump while filling the tub up. I have seen these fittings in many brands just compare the pictures and measurements with your...MSRP: $14.99$10.99 -
Screw, WaterWay, Executive, E-Series,Hi-Flo,Viper,Workman,EX2, 8-32 x 5/8"
MSRP: $5.99$2.99Face Screw for Waterway Wet Ends Fits Executive, Viper, Hi- Flo, Iron Might, Spa Flo, Supreme, Mustang, Workman and More Machine Thread, 8-32 x 5/8" , Stainless SteelMSRP: $5.99$2.99 -
How To Video Waterway Executive Pump Seal Impeller & Bearing Replacement How To The Spa Guy
$0.00In this Video The Spa Guy tells you How To Replace a Waterway Executive Pump Seal,,Impeller & Bearing... Save Save Save Save Save Save Save Save Save Save Save Save Save Save Save Save Save Save$0.00Qty in Cart: 0Price:$0.00Subtotal: -
How To Video Removing a Stuck Impeller on a Hot Tub Pump Spa Guy
$0.00This video is about The Spa Guy showing You How To Remove a Stuck Pump Impeller...This technique is similar for all brands of pumps and motors... Save Save Save Save Save Save Save Save Save Save Save$0.00Qty in Cart: 0Price:$0.00Subtotal: -
2X Hot Tub Spa 2" Heater or Pump Union Gasket Balboa Gecko ACC Video How To
MSRP: $8.99$6.99This Part is a Set of (2) Standard 2" Heater or Pump Union Gasket with a lip that is 2 1/2" Center to Center. The gasket is 2 7/8" across on the outside the inside diameter is about 2 3/16" and the lip that fits into the union is...MSRP: $8.99$6.99 -
(1X) 2" Split Nut Kit & Gasket Pump Union Emergency Repair Video How To
MSRP: $19.99$14.99This part is a 2" Pump Union Split Nut Repair Kit which includes the split nut, (2) Screws and a T Gasket for use with a 2" Pump Union. The Pump Union Split Nut that measures about 3" on the Inside of the threaded part and mounts to the...MSRP: $19.99$14.99 -
Set of (2) Hot Tub Spa 2" Slip X 2" Threaded Pump Unions Video How To
MSRP: $23.99$18.99This set is a Set of (2) 2" Slip X 2" Threaded Pump Union with Gasket or O-ring that matches Union. The Union recieves a 2" pipe or fitting on one side and then Screws to a 2" Wetend(Pump) Threaded Part on the...MSRP: $23.99$18.99 -
(2X) Hot Tub Spa 2" Split Nut Kit for Pump Union Emergency Repair Video How To
MSRP: $29.98$21.99This part is a Set of (2) 2" Pump Union Split Nut Repair Kit which includes the split nut and (2) Screws for use with a 2" Pump Union. The Pump Union Split Nut that measures about 3" on the Inside of the Threaded Part and mounts to the existing Pump...MSRP: $29.98$21.99