XP3 Aqua-Flo Complete Wet Ends
XP3 Aqua-Flo Complete Wet Ends
- Product
- Qty in Cart
- Quantity
- Price
- Subtotal
-
Pump Shaft Water Slinger, All Brands, Waterway , Aqua-flo, Sta-Rite, Vico, LX
MSRP: $4.99$2.99This part is a Pump Shaft Water Slinger designed to sling water away from the motor front bearing in case of a seal leak and it fits All Brands of Hot Tub Pumps.. This part goes on the shaft before you install the wet end..MSRP: $4.99$2.99 -
Red E 2 Part Epoxy Canister Kit Heat Cure Epoxy Sealer for all Metals and Rigid Plastics
MSRP: $24.99$19.99Red Epoxy is a new high performance, two-part, heat cured, epoxy repair kit for making permanent repairs on all metals and rigid plastics. Red Epoxy is specifically designed to exhibit a distinct color change when heat cured. Red Epoxy will provide a...MSRP: $24.99$19.99 -
Tool, Die to Thread Chase Pump Motor Shafts American Pumps Only
MSRP: $27.99$16.99This Tool is a Die that fits all American made Hot Tub Pump shaft threads.. This fits Hot Tub Pumps only in these brands.. Waterway, Aqua-Flo, Sta-Rite, Vico and Power-Right.. Note: This will NOT for LX Intertek Motor Shaft...MSRP: $27.99$16.99 -
Barb Adapter Connect Kit, 3/8"b x 1/4"mpt, With Silicon Kit Pump Wet End Face fits Aqua-Flo & CMP
MSRP: $17.99$11.99This kit is an Air Bleeder Barbed Plug Connect Kit that features a Barbed Plug that is 1/4" MPT x 3/8" Barb, (1) 3/8" x 3/8" Barbed Coupler, 4" of 3/8" clear tubing and Silicon sealer usually used on a Aqua-Flo and CMP Hot Tub Pump Faces to bleed the air...MSRP: $17.99$11.99 -
Connection Kit, 3/8" Tubing, 1/2" OD, 6" length for Air Systems or Jet Body Air Connections
MSRP: $12.99$6.99This Kit is a 3/8" Tubing Connection Kit for 3/8" Plumbing repairs where you are connecting old 3/8" Clear Tubing that measures about 1/2" OD between a cut air control line and the 3/8" Barb on an Air Manifold or Jet Body Air connection.. The kit...MSRP: $12.99$6.99 -
2 5/8" Lip Hot Tub Spa 2" Heater or Pump Union Gasket CMP Video How To
MSRP: $7.99$4.99This Part is (1) NON-Standard 2" Heater or Pump Union Gasket with a 2 5/8" Center to Center Lip. The gasket is 2 7/8" across on the outside the inside diameter is about 2" and the lip that fits into the union is 2 5/8"...MSRP: $7.99$4.99 -
Barb Adapter, 3/8"b x 1/4"mpt, Pump Wet End Face fits Aqua-Flo & CMP
MSRP: $12.99$8.99This part is a Air Bleeder barbed plug usually used on a Aqua-Flo and CMP Hot Tub Pump Faces to bleed the air off the pump while filling the tub up. I have seen these fittings in many brands of Hot Tubs just compare the pictures and measurements with...MSRP: $12.99$8.99 -
Barb Adapter, 3/8"b x 1/4"mpt, With Silicon Kit Pump Wet End Face fits Aqua-Flo & CMP
MSRP: $12.99$8.99This kit is a Air Bleeder barbed plug and Silicon sealer usually used on a Aqua-Flo and CMP Hot Tub Pump Faces to bleed the air off the pump while filling the tub up. I have seen these fittings in many brands of Hot Tubs just compare the pictures and...MSRP: $12.99$8.99 -
Hot Tub Spa 2 1/2"Threaded X 2 1/2" Slip Pump Union for Viper Xp3 Some Executive
MSRP: $19.99$14.99This part is a 2 1/2" Slip X 2 1/2" Threaded Pump Union with Gasket or O-ring that matches Union. The Union receives a 2 1/2" pipe or fitting on one side which measures about 3" O.D. and then Screws to a 2...MSRP: $19.99$14.99 -
Hot Tub Spa 2 1/2"Threaded X 2" Slip Pump Union for Viper Xp3 Some Executive
MSRP: $19.99$15.99You are buying a 2" Slip X 2 1/2" Threaded Pump Union with Gasket or O-ring that matches Union. The Union recieves a 2" pipe or fitting on one side which measures about 2 3/8" O.D. and then Screws to a 2...MSRP: $19.99$15.99 -
Wet End, Aqua-Flo, XP3, 2.5HP, 56fr, 2 1/2" x 2 1/2", Pump, 48 or 56 Frame
MSRP: $154.99$134.99Aqua-Flo XP3 Complete 2.5HP Wet End fits on a Aqua-Flo Xp3 pump which has 2 1/2" inlet and outlet which measures about 3 9/16" across the threads... If you don't need a complete wet end a list of parts are below... Note: All of the below parts fit this...MSRP: $154.99$134.99 -
Wet End, Aqua-Flo, XP3, 3.0HP, 56fr, 2 1/2" x 2 1/2", Pump, 48 or 56 Frame
MSRP: $154.99$134.99Aqua-Flo XP3 Complete 3HP Wet End fits on a Aqua-Flo Xp3 pump which has 2 1/2" inlet and outlet which measures about 3 9/16" across the threads... If you don't need a complete wet end a list of parts are below... Note: All of the below parts fit this...MSRP: $154.99$134.99