Complete Wet Ends

Waterway Viper Complete 3HP Wet End fits on a Waterway Viper pump which has 2 1/2" inlet and outlet which measures about 3 9/16" across the threads... If you don't need a complete wet end a list of parts are below... Click Here for the Face...

Waterway Viper Complete 4HP Wet End fits on a Waterway Viper pump which has 2 1/2" inlet and outlet which measures about 3 9/16" across the threads... If you don't need a complete wet end a list of parts are below... Click Here for the Face...

This item is a 48fr Vico 2" x 2" complete wet end.. It is for a 1.5HP motor which would be about 9.0Amps for 230V and 14.0 Amps for 115V.. Pump to Motor Foot Types 1a Motor Frame 48 Frame Thru-Bolt Drain Plug Location 6...

NOTE: This Part will Fit Sundance® or Jacuzzi® Tubs with a Guangdong LX Wet End if you replace the entire Wet End for internal parts of the wet end you already have click here Jacuzzi® & Sundance® LX...

// Read This Note First!! NOTE: This Part will Fit Sundance® or Jacuzzi® Tubs with a Guangdong LX Wet End if you replace the entire Wet End for internal parts of the wet end you already have click here Jacuzzi® &...

Waterway Hi-Flo Wet EndSide discharge, 2"mbt suction/discharge, 48 frame wet end for the Waterway Hi-Flo pump. This wet end is used with a 1.5hp, 48 frame, thru-bolt style motor. The motor used may be either a single or dual speed. The wet end may be...

You are buying a 4 HP 48 Frame Waterway Executive 2" X 2" Wet End / Pump complete with Screws, Volute, Impeller, Seal, Face and the Wear Ring. The difference between a 48 or 56 Frame wet end is the spacing of the Motor Thru bolts. The 48 Frame will be 3...

This part is a Complete 1HP Aqua-Flo 2" x 2" ( Which measures about 3" Across the Threads) Side discharge 48 frame wet end for XP2 pumps. This wet end is used with a 48 frame motor that would have about 8.0 Amps on High Speed on a 230V motor or 12.0 Amps...

This part is a Complete XP2e 6.3" 2HP Aqua-Flo 2" x 2" ( Which measures about 3" Across the Threads) Side discharge 56 frame wet end for XP2 pumps. This wet end is used with a 56 frame motor that would have about 10.0 Amps on High Speed on a 230V motor...

This item is a 48 Frame Vico Wet End with 2" x 2" inlet and outlet that would measure about 3" across the threads and it has a 2.0HP impeller which would fit a motor that has 10.0 amps at 230V and 16.0 amps at 115V.. Pump to Motor Foot Types  ...

You are buying a 5 HP 56 Frame Waterway Executive 2 1/2" X 2" Wet End / Pump complete with Screws, Volute, Impeller, Seal, Face and the Wear Ring. The difference between a 48 or 56 Frame wet end is the spacing of the Motor Thru bolts. The 48 Frame will...

This part is a 48Frame Center Discharge 1 1/2 x 1 1/2" 1HP Waterway Wet End.. The threads would measure about 2 3/8" Edge to Edge.. This wet end would be found on a 115V motor with an Amperage of about 12 Amps or a 230V motor with an Amperage rating of...