Pump Motors

Single speed 48 frame spa motor rated at 1.5 HP. This dual voltage single speed motor can run at 115 or 230 volts. The amp rating on this motor is 7.7 amps at 230 volts and 15.4 amps at 115 volts. This thru bolt motor will fit any North American wetend...

US Motors / Nidec 1.0 HP motor, 115 volts, 2 speed with no top mounted capacitor. This 10.3 amp 48 frame motor can be used with many brands of poumps and wetend. Some brands this motor will fit are Waterway, Aqua-Flo, Vico, Balboa, Sta-rite and many more...

This part is a (4) Bolt head Screws and Washer Kit for 48 or 56 frame pumps used to mount pump motors down on wood based hot tubs. . Includes  (4) Screw head 1 1/8" Screws and (4) Washers.  Note: Rubber mount not included in this listing it can...

This part is a Rubber Pump Motor Base Vibration Dampener with (4) Bolt head Screw and Washer Kit for 48 and 56 frame pumps. Includes 4 soft 'washers' to isolate mounting screws from touching the motor base along with (4) Screw head 1 1/8" Screws and...

1.5 HP thru-bolt pump motor in 48 frame. This 115 Volt 2 speed motor has a high speed amp rating of 13.5 and a low speed amp rating of 4.7.  You can find wet ends for this motor by clicking here.. Complete Wet Ends Motor Type Spa Motor...

This part is a Motor only , Century, 3.0hp, 230v, 2-spd, SF 1.00, 48Y frame, 12.0A.. Motor Amperage    12.0AVoltage    230vPhase    1 Phase (1ph)Frame Type    48YSpeed    1 Speed...

This part is a Pump Motor only that is 48 frame 115V 2 speed with 8.8.0 Amps on High Speed and 2.9A on Low Speed. Some of these motors have the BHP or SPL marking of 1.0 HP but it is truley a .75 HP motor. You can find wet ends for this motor by...

1.0 Hp single speed thru-bolt pump motor in the 48Y frame style. This motor runs at 230 Volts and draws 6.0 amps. Motor Type Spa Motor Amperage 6.0A Voltage 230v Frame Type 48Y Speed 1 Speed (1-Spd) Horsepower 1.0hp Total Horsepower 1...

This motor is for either a Vertical or Horizontal Mount Aqua Flo Circ Master CMVP, CMCP or CMHP 230 Volt Pump 1/12 or 1/15th HP .067 Amps 1 Speed.. Since the FMVP Pump has been discontinued this is a way you can do the repair.. You can choice parts for...

This motor (Only) is a replacement for some Aqua-Flo, 39577 Code 06290, 115V or 230V, (1) Speed, 20.0Amp or 10.0Amp, 48 frame pump..  Keep in mind if you choose this high amperage pump and have a tub with a wall style 115V plug this pump may draw...

This part is a Pump Motor only and does not include the wet end.. It is a US Motor, with 5/16" Thru Bolts, 3-4.0hp, 230v, 2 Speed, 56 Y Frame, 12 Amp High Speed and 4.4Amp Low Speed.. This motor can be found bolted to several different 56 frame pumps...

In this video The Spa Guy shows you How To Read and understand a Hot Tub Pump Motor Wiring Schematic and wire your Hot Tub Pump motor.. Most Hot Tub Pump Motors do not come with a wire so this teaches you how to put the wire on the new motor.....