Waterway 48 Frame Pumps

Waterway 48 Frame Pumps

Read this information to Help to determine the Frame and HP.. The way you can determine whether your pump is a 48 or 56 Frame is by measuring the width of the motor. A 48 Frame motor will measure 5 3/4" wide across the back and a 56 Frame will measure about 6 1/2" wide across the back.

 
For 230 Volt Pumps Look on the label of the motor for the two amperages if you have a 2 speed pump, if its a single speed look for a single amperage. It will look something like this: 10.0/3.5  The 10.0 is the high amperage in this example. 
8.0 = 1 HP
10.0 = 2 HP
12.0 = 3 HP
14.0 = 4 HP
16.0 = 5 HP 
 
For 115 Volt Pumps Look on the label of the motor for the two amperages if you have a 2 speed pump, if its a single speed look for a single amperage. It will look something like this: 10.8/2.8  The 10.8 is the high amperage in this example and would equate to a 1 HP. 
   8.0 = .5 HP 
9.0-10.0 = .75 HP
10.0-13.00 = 1 HP
13.5-15.0 = 1.5 HP
16.0-20.0 = 2 HP
 
Note: These Amperages are Averages so find the Amperage closest to your pumps Amperage. Note for the Note: 2HP 115V pumps are very rare, do not order one thinking you can add more power. This pump or even a 1.5HP pump will cause your PLug N Play tub to damage the electrical system, Plug, Wires and even the pump motor. 
 
NOTE: Your pump or motor may say a different Horse Power than what you see here, DO NOT go by what is listed on the motor, go by the amperage on the label. 
NOTE for the NOTE: TRUST ME ON THIS, everybody lies about their Horse Power. But the amperage does not lie. Most people are told they have 5 HP pumps, if you do the math two 5 HP pumps at 16 amps is 32 amps. Plus a 5.5 KW heater is 21 amps. That means with both pumps running and the heater on it will draw 53 AMPS. I bet your HOT TUB is on a 50 AMP breaker. Therefore contrary to what you have been told you DO NOT have a 5 or 6 or 7 Hp pump.
 
screen-shot-2015-10-27-at-12.56.04-pm.jpg
  • Product
  • Qty in Cart
  • Quantity
  • Price
  • Subtotal
  • Spa Hot Tub Pump Air Bleeder Add On Kit 1/4" Mpt X 3/8" Barb with Sealer Fitting
The Hole size for this fitting is about 1 3/16" An example of the bleeder system and this barb in use on a Waterway Pump..
    Add to Cart

    Spa Hot Tub Pump Air Bleeder Add On Kit 1/4" Mpt X 3/8" Barb with Sealer Fitting

    MSRP: $39.99
    $29.99
    This part is an Add On Air Bleeder kit featuring a Mountable Bleeder Fitting with a removable plug, a 1/4" Mpt X 3/8" Barb plug, (2) Clamps for each end of the tubing and 36" of Clear 3/8" ID and Silicon sealer..   This kit can be added if you...
    MSRP: $39.99
    $29.99
    Qty in Cart: 0
    Quantity:
    Price:
    MSRP: $39.99
    $29.99
    Subtotal:
  • 2 5/8" Lip Hot Tub Spa 2" Heater  or Pump Union Gasket CMP Video How To
Note: This Gasket is the exception not the rule so be sure you measure the lip on the gasket 2 5/8" Center to Center and the groove in your union for the lip to fit in.. If it is 2 1/2" look for a regular 2: pump heater union gasket... 2 5/8" Lip Hot Tub Spa 2" Heater  or Pump Union Gasket CMP Video How To
Note: This Gasket is the exception not the rule so be sure you measure the lip on the gasket 2 5/8" Center to Center and the groove in your union for the lip to fit in.. If it is 2 1/2" look for a regular 2: pump heater union gasket...
    Add to Cart

    2 5/8" Lip Hot Tub Spa 2" Heater or Pump Union Gasket CMP Video How To

    MSRP: $7.99
    $4.99
    This Part is (1) NON-Standard 2" Heater or Pump Union Gasket with a 2 5/8" Center to Center Lip. The gasket is 2 7/8" across on the outside the inside diameter is about 2" and the lip that fits into the union is 2 5/8"...
    MSRP: $7.99
    $4.99
    Qty in Cart: 0
    Quantity:
    Price:
    MSRP: $7.99
    $4.99
    Subtotal:
  • An Example of a 230V (2) Speed Emerson motor wiring on the Motor End:
High Speed Red Wire goes on (H) for High Speed
Common or Neutral White Wires goes on (C) for Common or Neutral.. Note: In this case this wire would be Hot 115V..
Low Speed Black wire goes on (L) for Low Speed
Green goes on 1/4" Screw to the body cover... This is an example of a 2 speed AMP Plug..
Note: if this goes on a Motor that is 115V the white wire would be Neutral if it is 230V the white wire would be Hot 115V...
In these positions Red is normally High Speed, Black, Low, White Neutral and Green Ground..

    How To Wire a Hot Tub Pump Motor Correctly The Spa Guy

    $0.00
    In this video The Spa Guy shows you How To Read and understand a Hot Tub Pump Motor Wiring Schematic and wire your Hot Tub Pump motor.. Most Hot Tub Pump Motors do not come with a wire so this teaches you how to put the wire on the new motor.....
    $0.00
    Quick view
    Qty in Cart: 0
    Price:
    $0.00
    Subtotal:
  • Example of Wet End at 9 o'clock Example of Wet End at 12 o'clock

    How To Turn a Pump Wet End to the Direction You Need The Spa Guy

    $0.00
    This video is about The Spa Guy teaching you How To Turn a Pump Wet End to the Direction You Need it to be in to fit your hot tub... Save Save Save Save Save Save Save Save Save Save Save Save Save Save Save Save Save Save Save Save
    $0.00
    Quick view
    Qty in Cart: 0
    Price:
    $0.00
    Subtotal:
  • Bleeder Drain Plug & O-Ring , 3/8", Waterway Fits Executive, Viper, Hi- Flo, Iron Might, Spa Flo, Supreme, Mustang, Workman and More Bleeder Drain Plug & O-Ring , 3/8", Waterway Fits Executive, Viper, Hi- Flo, Iron Might, Spa Flo, Supreme, Mustang, Workman and More
    Add to Cart

    Bleeder Drain Plug & O-Ring , 3/8", Waterway Fits Executive, Viper, Hi- Flo, Iron Might, Spa Flo, Supreme, Mustang, Workman and More

    MSRP: $5.99
    $4.99
    Drain Plug with O-Ring for Waterway Wet Ends Fits Executive, Viper, Hi- Flo, Iron Might, Spa Flo, Supreme, Mustang, Workman and More  We also offer the 3/8" Barb that replaces these plug in the case of using a Pump Bleeder System... This are found...
    MSRP: $5.99
    $4.99
    Qty in Cart: 0
    Quantity:
    Price:
    MSRP: $5.99
    $4.99
    Subtotal:
  • Spa Hot Tub Pump Universal Air Bleeder Plug 1/4" Mpt X 3/8" Barb Fitting An example of the bleeder system and this barb in use on a Waterway Pump..
    Add to Cart

    Spa Hot Tub Pump Universal Air Bleeder Plug 1/4" Mpt X 3/8" Barb Fitting

    MSRP: $9.99
    $6.99
    This part is a Universal Air Bleeder 1/4" Mpt X 3/8" Barb plug usually used on Hot Tub Pump Faces to bleed the air off the pump while filling the tub up. I have seen these fittings in many brands of Hot Tubs just compare the pictures and measurements...
    MSRP: $9.99
    $6.99
    Qty in Cart: 0
    Quantity:
    Price:
    MSRP: $9.99
    $6.99
    Subtotal:
  • Spa Hot Tub Pump Universal Air Bleeder Plug 1/4" Mpt X 3/8" Barb with Sealer Fitting An example of the bleeder system and this barb in use on a Waterway Pump..
    Add to Cart

    Spa Hot Tub Pump Universal Air Bleeder Plug 1/4" Mpt X 3/8" Barb with Sealer Fitting

    MSRP: $14.99
    $10.99
    This Kit is a Air Bleeder 1/4" Mpt X 3/8" Barb plug and Silicon sealer usually used on Hot Tub Pump Faces to bleed the air off the pump while filling the tub up. I have seen these fittings in many brands of Hot Tubs just compare the pictures and...
    MSRP: $14.99
    $10.99
    Qty in Cart: 0
    Quantity:
    Price:
    MSRP: $14.99
    $10.99
    Subtotal:
  • Barb Adapter, 3/8"b x 1/4"mpt, Pump Wet End Face fits Aqua-Flo & CMP An example of the bleeder system and this barb in use on a Pump..
    Add to Cart

    Barb Adapter, 3/8"b x 1/4"mpt, Pump Wet End Face fits Aqua-Flo & CMP

    MSRP: $12.99
    $8.99
    This part is a Air Bleeder barbed plug usually used on a Aqua-Flo and CMP Hot Tub Pump Faces to bleed the air off the pump while filling the tub up. I have seen these fittings in many brands of Hot Tubs just compare the pictures and measurements with...
    MSRP: $12.99
    $8.99
    Qty in Cart: 0
    Quantity:
    Price:
    MSRP: $12.99
    $8.99
    Subtotal:
  • Barb Adapter, 3/8"b x 1/4"mpt, With Silicon Kit  Pump Wet End Face fits Aqua-Flo & CMP An example of the bleeder system and this barb in use on a Waterway Pump..
    Add to Cart

    Barb Adapter, 3/8"b x 1/4"mpt, With Silicon Kit Pump Wet End Face fits Aqua-Flo & CMP

    MSRP: $12.99
    $8.99
    This kit is a Air Bleeder barbed plug and Silicon sealer usually used on a Aqua-Flo and CMP Hot Tub Pump Faces to bleed the air off the pump while filling the tub up. I have seen these fittings in many brands of Hot Tubs just compare the pictures and...
    MSRP: $12.99
    $8.99
    Qty in Cart: 0
    Quantity:
    Price:
    MSRP: $12.99
    $8.99
    Subtotal:
  • Barb Bleeder 1/4" Mpt X 3/8" with Silicon Kit for Waterway Pump Fitting An example of the bleeder system and this barb in use on a Waterway Pump..
    Add to Cart

    Barb Bleeder 1/4" Mpt X 3/8" with Silicon Kit for Waterway Pump Fitting

    MSRP: $17.99
    $11.99
    This kit is anAir Bleeder barbed plug and Silicon sealer usually used on a Waterway Hot Tub Pump Face to bleed the air off the pump while filling the tub up. I have seen these fittings in many brands just compare the pictures and measurements with your...
    MSRP: $17.99
    $11.99
    Qty in Cart: 0
    Quantity:
    Price:
    MSRP: $17.99
    $11.99
    Subtotal:
  • 3/8" Clear Vinyl Tubing, 12" length for Air Manifold, Jet Body, Blower Jet, Pump Bleeder 3/8" Clear Vinyl Tubing, 12" length for Air Manifold, Jet Body, Blower Jet, Pump Bleeder
    Add to Cart

    3/8" Clear Vinyl Tubing, 12" length for Air Manifold, Jet Body, Blower Jet, Pump Bleeder

    MSRP: $4.99
    $3.99
    This part is a 12" Piece of 3/8" Clear Tubing used with Air Valves... If you need 3 feet order (3x) and it will ship uncut.. This tubing measures 3/8" Inside Diameter and 1/2" O.D. and is used in most Air Applications on most tubs from the air...
    MSRP: $4.99
    $3.99
    Qty in Cart: 0
    Quantity:
    Price:
    MSRP: $4.99
    $3.99
    Subtotal:
  • How To Video Hot Tub Broken Pump Union Emergency Repair The Spa Guy How To Series

    How To Video Hot Tub Broken Pump Union Emergency Repair The Spa Guy How To Series

    $0.00
    In this video The Spa Guy shows you how to repair a broken Hot Tub Pump Union without cutting plumbing out and using an Emergency Pump Union Split Nut Kit...      #sparepair #hottubrepair  #thespaguy...
    $0.00
    Quick view
    Qty in Cart: 0
    Price:
    $0.00
    Subtotal:
  • Total: items /

Adding your products to cart