Aqua-Flo Complete Pumps

Aqua-Flo Complete Pumps

Aqua-Flo Complete Pumps

Read this information to Help to determine the Frame and HP.. The way you can determine whether your pump is a 48 or 56 Frame is by measuring the width of the motor. A 48 Frame motor will measure 5 3/4" wide across the back and a 56 Frame will measure about 6 1/2" wide across the back.

 
For 230 Volt Pumps Look on the label of the motor for the two amperages if you have a 2 speed pump, if its a single speed look for a single amperage. It will look something like this: 10.0/3.5  The 10.0 is the high amperage in this example. 
8.0 = 1 HP
10.0 = 2 HP
12.0 = 3 HP
14.0 = 4 HP
16.0 = 5 HP 
 
For 115 Volt Pumps Look on the label of the motor for the two amperages if you have a 2 speed pump, if its a single speed look for a single amperage. It will look something like this: 10.8/2.8  The 10.8 is the high amperage in this example and would equate to a 1 HP. 
   8.0 = .5 HP 
9.0-10.0 = .75 HP
10.0-13.00 = 1 HP
13.5-15.0 = 1.5 HP
16.0-20.0 = 2 HP
Note: These Amperages are Averages so find the Amperage closest to your pumps Amperage. Note for the Note: 2HP 115V pumps are very rare, do not order one thinking you can add more power. This pump or even a 1.5HP pump will cause your PLug N Play tub to damage the electrical system, Plug, Wires and even the pump motor. 
 
NOTE: Your pump or motor may say a different Horse Power than what you see here, DO NOT go by what is listed on the motor, go by the amperage on the label. 
NOTE for the NOTE: TRUST ME ON THIS, everybody lies about their Horse Power. But the amperage does not lie. Most people are told they have 5 HP pumps, if you do the math two 5 HP pumps at 16 amps is 32 amps. Plus a 5.5 KW heater is 21 amps. That means with both pumps running and the heater on it will draw 53 AMPS. I bet your HOT TUB is on a 50 AMP breaker. Therefore contrary to what you have been told you DO NOT have a 5 or 6 or 7 Hp pump.
 
screen-shot-2015-10-27-at-12.56.04-pm.jpg
  • Product
  • Qty in Cart
  • Quantity
  • Price
  • Subtotal
  • Complete Pump, 39577, Aqua-Flo, 2.0HP, 115v/230V, 20.0A/10.0A, 48 frame, 2"x 2", 1 Speed, Vendor 4081 Complete Pump, 39577, Aqua-Flo, 2.0HP, 115v/230V, 20.0A/10.0A, 48 frame, 2"x 2", 1 Speed, Vendor 4081
    Add to Cart

    Complete Pump, 39577, Aqua-Flo, 2.0HP, 115v/230V, 20.0A/10.0A, 48 frame, 2"x 2", 1 Speed, Vendor 4081

    MSRP: $689.99
    $519.99
    This complete pump and motor is an Aqua-Flo 39577 Code 06290, 115V or 230V, (1) Speed, 20.0Amp or 10.0Amp, 48 frame 2" x 2" XP2 pump and motor... The 2" inlet and outlet measure about 3" across the threads... Keep in mind if you choose this high amperage...
    MSRP: $689.99
    $519.99
    Qty in Cart: 0
    Quantity:
    Price:
    MSRP: $689.99
    $519.99
    Subtotal:
  • Complete Pump, Aqua-Flo, XP2e, 1.5HP, 230v, 56fr, 2"X 2" 1 or 2 Speed 8.9A Complete Pump, Aqua-Flo, XP2e, 1.5HP, 230v, 56fr, 2"X 2" 1 or 2 Speed 8.9A
    Add to Cart

    Complete Pump, Aqua-Flo, XP2e, 1.5HP, 230v, 56fr, 2"X 2" 1 or 2 Speed 8.9A

    MSRP: $732.99
    $509.99
    This Jet Pump is found from the factory in many hot tubs and will be an easy installation for people who are handy.   This pump is a 56 frame XP2e 1.5HP 230V Side Discharge wet end with a 2" suction side and 2" pressure side which measures about...
    MSRP: $732.99
    $509.99
    Qty in Cart: 0
    Quantity:
    Price:
    MSRP: $732.99
    $509.99
    Subtotal:
  • Complete Pump, Aqua-Flo XP2, 1.0HP, 115v, 10.5/3.2A, 48 frame, 2"x 2", 1 or 2 Speed Complete Pump, Aqua-Flo XP2, 1.0HP, 115v, 10.5/3.2A, 48 frame, 2"x 2", 1 or 2 Speed
    Add to Cart

    Complete Pump, Aqua-Flo XP2, 1.0HP, 115v, 10.5/3.2A, 48 frame, 2"x 2", 1 or 2 Speed

    MSRP: $589.99
    $489.99
    This pump is a 115V (2) Speed 10.5 High and 3.2A Low Speed 48 frame 2" x 2" XP2 pump and motor... The 2" inlet and outlet measure about 3" across the threads... Keep in mind if you choose this high amperage pump and have a tub with a wall style 115V plug...
    MSRP: $589.99
    $489.99
    Qty in Cart: 0
    Quantity:
    Price:
    MSRP: $589.99
    $489.99
    Subtotal:
  • Out of stock
    Pump, Dreamaker Spas, 1.5HP (Pre-2014) 115V, 1-Speed, 1-1/2"MBT, CD, 48-Frame w/ Amp Cord

    Pump, Dreamaker Spas, 1.5HP (Pre-2014) 115V, 1-Speed, 1-1/2"MBT, CD, 48-Frame w/ Amp Cord

    MSRP: $641.14
    $403.87
    This Pump is a 48Frame 115V 1 Speed with a 1.5-2.0 HP Wet End that features a 1 1/2" x 1 1/2" Center Discharge inlet and outlet Wet End that measures about 2 5/16" across the threads...  This pump is designed to fit Dreamaker Spas with friction...
    MSRP: $641.14
    $403.87
    Qty in Cart: 0
    Price:
    MSRP: $641.14
    $403.87
    Subtotal:
  • 2 5/8" Lip Hot Tub Spa 2" Heater  or Pump Union Gasket CMP Video How To
Note: This Gasket is the exception not the rule so be sure you measure the lip on the gasket 2 5/8" Center to Center and the groove in your union for the lip to fit in.. If it is 2 1/2" look for a regular 2: pump heater union gasket... 2 5/8" Lip Hot Tub Spa 2" Heater  or Pump Union Gasket CMP Video How To
Note: This Gasket is the exception not the rule so be sure you measure the lip on the gasket 2 5/8" Center to Center and the groove in your union for the lip to fit in.. If it is 2 1/2" look for a regular 2: pump heater union gasket...
    Add to Cart

    2 5/8" Lip Hot Tub Spa 2" Heater or Pump Union Gasket CMP Video How To

    MSRP: $7.99
    $4.99
    This Part is (1) NON-Standard 2" Heater or Pump Union Gasket with a 2 5/8" Center to Center Lip. The gasket is 2 7/8" across on the outside the inside diameter is about 2" and the lip that fits into the union is 2 5/8"...
    MSRP: $7.99
    $4.99
    Qty in Cart: 0
    Quantity:
    Price:
    MSRP: $7.99
    $4.99
    Subtotal:
  • An Example of a 230V (2) Speed Emerson motor wiring on the Motor End:
High Speed Red Wire goes on (H) for High Speed
Common or Neutral White Wires goes on (C) for Common or Neutral.. Note: In this case this wire would be Hot 115V..
Low Speed Black wire goes on (L) for Low Speed
Green goes on 1/4" Screw to the body cover... This is an example of a 2 speed AMP Plug..
Note: if this goes on a Motor that is 115V the white wire would be Neutral if it is 230V the white wire would be Hot 115V...
In these positions Red is normally High Speed, Black, Low, White Neutral and Green Ground..

    How To Wire a Hot Tub Pump Motor Correctly The Spa Guy

    $0.00
    In this video The Spa Guy shows you How To Read and understand a Hot Tub Pump Motor Wiring Schematic and wire your Hot Tub Pump motor.. Most Hot Tub Pump Motors do not come with a wire so this teaches you how to put the wire on the new motor.....
    $0.00
    Quick view
    Qty in Cart: 0
    Price:
    $0.00
    Subtotal:
  • Example of Wet End at 9 o'clock Example of Wet End at 12 o'clock

    How To Turn a Pump Wet End to the Direction You Need The Spa Guy

    $0.00
    This video is about The Spa Guy teaching you How To Turn a Pump Wet End to the Direction You Need it to be in to fit your hot tub... Save Save Save Save Save Save Save Save Save Save Save Save Save Save Save Save Save Save Save Save
    $0.00
    Quick view
    Qty in Cart: 0
    Price:
    $0.00
    Subtotal:
  • 3/8" Clear Vinyl Tubing, 12" length for Air Manifold, Jet Body, Blower Jet, Pump Bleeder 3/8" Clear Vinyl Tubing, 12" length for Air Manifold, Jet Body, Blower Jet, Pump Bleeder
    Add to Cart

    3/8" Clear Vinyl Tubing, 12" length for Air Manifold, Jet Body, Blower Jet, Pump Bleeder

    MSRP: $4.99
    $3.99
    This part is a 12" Piece of 3/8" Clear Tubing used with Air Valves... If you need 3 feet order (3x) and it will ship uncut.. This tubing measures 3/8" Inside Diameter and 1/2" O.D. and is used in most Air Applications on most tubs from the air...
    MSRP: $4.99
    $3.99
    Qty in Cart: 0
    Quantity:
    Price:
    MSRP: $4.99
    $3.99
    Subtotal:
  • How To Video Hot Tub Broken Pump Union Emergency Repair The Spa Guy How To Series

    How To Video Hot Tub Broken Pump Union Emergency Repair The Spa Guy How To Series

    $0.00
    In this video The Spa Guy shows you how to repair a broken Hot Tub Pump Union without cutting plumbing out and using an Emergency Pump Union Split Nut Kit...      #sparepair #hottubrepair  #thespaguy...
    $0.00
    Quick view
    Qty in Cart: 0
    Price:
    $0.00
    Subtotal:
  • How To Video GFCI Breaker Tripping New Wire Up Hot Tub Diagnose The Spa Guy

    How To Video GFCI Breaker Tripping New Wire Up Hot Tub Diagnose The Spa Guy

    $0.00
    This video is The Spa Guy teaching you how to Diagnose a New Wire Up Situation where you just wired your hot tub up and it is tripping the breaker and it is either a new tub or it is used and ran fine at the last location...... Save
    $0.00
    Quick view
    Qty in Cart: 0
    Price:
    $0.00
    Subtotal:
  • How To Video Aqua Flo XP2e Leaking Pump Replace Seal Short Version Hot Tubs How To

    How To Video Aqua Flo XP2e Leaking Pump Replace Seal Short Version Hot Tubs How To

    $0.00
    In this Video the Spa Guy show you how to install a 200 seal in an Aqua-Flo Wet End.. This is the seal only version... For the full version look in The Spa Guy's How To Video Library.....
    $0.00
    Quick view
    Qty in Cart: 0
    Price:
    $0.00
    Subtotal:
  • Removing a Stuck Impeller on a Hot Tub Pump How To Spa Guy

    How To Video Removing a Stuck Impeller on a Hot Tub Pump Spa Guy

    $0.00
    This video is about The Spa Guy showing You How To Remove a Stuck Pump Impeller...This technique is similar for all brands of pumps and motors... Save Save Save Save Save Save Save Save Save Save Save
    $0.00
    Quick view
    Qty in Cart: 0
    Price:
    $0.00
    Subtotal:
  • Total: items /

Adding your products to cart