Jet Pumps, Complete
Jet Pumps, Complete
Read this information to Help to determine the Frame and HP.. The way you can determine whether your pump is a 48 or 56 Frame is by measuring the width of the motor. A 48 Frame motor will measure 5 3/4" wide across the back and a 56 Frame will measure about 6 1/2" wide across the back.
For 230 Volt Pumps Look on the label of the motor for the two amperages if you have a 2 speed pump, if its a single speed look for a single amperage. It will look something like this: 10.0/3.5 The 10.0 is the high amperage in this example.
8.0 = 1 HP
10.0 = 2 HP
12.0 = 3 HP
14.0 = 4 HP
16.0 = 5 HP
For 115 Volt Pumps Look on the label of the motor for the two amperages if you have a 2 speed pump, if its a single speed look for a single amperage. It will look something like this: 10.8/2.8 The 10.8 is the high amperage in this example and would equate to a 1 HP.
8.0 = .5 HP
9.0-10.0 = .75 HP
10.0-13.00 = 1 HP
13.5-15.0 = 1.5 HP
16.0-20.0 = 2 HP
Note: These Amperages are Averages so find the Amperage closest to your pumps Amperage. Note for the Note: 2HP 115V pumps are very rare, do not order one thinking you can add more power. This pump or even a 1.5HP pump will cause your PLug N Play tub to damage the electrical system, Plug, Wires and even the pump motor.
NOTE: Your pump or motor may say a different Horse Power than what you see here, DO NOT go by what is listed on the motor, go by the amperage on the label.
NOTE for the NOTE: TRUST ME ON THIS, everybody lies about their Horse Power. But the amperage does not lie. Most people are told they have 5 HP pumps, if you do the math two 5 HP pumps at 16 amps is 32 amps. Plus a 5.5 KW heater is 21 amps. That means with both pumps running and the heater on it will draw 53 AMPS. I bet your HOT TUB is on a 50 AMP breaker. Therefore contrary to what you have been told you DO NOT have a 5 or 6 or 7 Hp pump.
https://hottubpartsofamerica.com/pumps-and-related-parts/jet-pumps-complete/aqua-flo-complete-pumps/
https://hottubpartsofamerica.com/pumps-and-related-parts/jet-pumps-complete/intertek-lx-chinese-pumps/
https://hottubpartsofamerica.com/pumps-and-related-parts/jet-pumps-complete/sta-rite-complete-pumps/jacuzzi-sundance-complete-pumps/
https://hottubpartsofamerica.com/pumps-and-related-parts/jet-pumps-complete/sta-rite-complete-pumps/
https://hottubpartsofamerica.com/pumps-and-related-parts/jet-pumps-complete/vico-complete-pumps/
https://hottubpartsofamerica.com/pumps-and-related-parts/jet-pumps-complete/waterway-complete-pumps/
https://hottubpartsofamerica.com/pumps-and-related-parts/jet-pumps-complete/watkins-wavemaster-complete-pumps/
- Product
- Qty in Cart
- Quantity
- Price
- Subtotal
-
Hot Tub 2" Pump Union Slice To Plumbing Connect Kit
MSRP: $42.98$39.99This Kit is a 2" Pump Union, Slice Valve, Spin Kit To Plumbing Connect Kit found in many Hot Tubs. The Pump Union which measures about 3" Inside the threads receives a 2"street X 2" Slip Slice Valve then you glue the 2" coupler to spin it to win it on...MSRP: $42.98$39.99 -
Pump Bleeder Barb, LX, 1/2" Barb x 1/4"Mpt Fits some Watkins, Wavemaster
MSRP: $18.99$14.99This part is a Pump Bleeder Barb fit some Watkins Wavemaster LX Pumps and others.. It is 1/2" Barb x 1/4"Mpt and is used with an unusually large bleeder line.. The line is 1/2" Inside Diameter not 3/8" Inside Diameter like most bleeder lines.. This part...MSRP: $18.99$14.99 -
Pump Bleeder Barb, XP2, XP2E, LX, 1/4" Barb x 1/4"Mpt fist some Watkins
MSRP: $15.99$11.99This part is a Pump Bleeder Barb fits some Watkins Wavemaster XP2, XP2E, LX and others.. It is 1/4" Barb x 1/4"Mpt and is used with an unusual bleeder line.. The line is 1/4" Inside Diameter not 3/8" Inside Diameter like most bleeder lines.. This part...MSRP: $15.99$11.99 -
Impeller, (2) Bearing & Seal Kit XP2 2.5 HP 2 1/8" Eye Vendor # 4081, Fits Some Watkins Hot Spring
MSRP: $99.99$78.99This is a 2.5HP Seal, (2) Bearings & Impeller Kit with a 2 1/8" Eye Width. This Impeller fits between the Face and the Volute of a XP2 Wet End found on some Watkins Hot Spring Caldera pumps with Vendor Code 4081. Fits Some Watkins Hot Spring...MSRP: $99.99$78.99 -
Fits Some Watkins Hot Spring, Impeller, (1) Bearing & Seal Kit XP2 2.5 HP 2 1/8" Eye Vendor # 4081
MSRP: $84.99$68.99This is a 2.5HP Seal, (1) Bearing & Impeller Kit with a 2 1/8" Eye Width. This Impeller fits between the Face and the Volute of a XP2 Wet End found on some Watkins Hot Spring Caldera pumps with Vendor Code 4081. Fits Some Watkins Hot Spring....MSRP: $84.99$68.99 -
Fits Some Watkins Hot Spring, Impeller, (2) Bearing & Seal Kit XP2 2.0HP 2 1/8" Eye Vendor # 4081
MSRP: $99.99$78.99This is a Watkins Wavemaster 8000 or 8200 2.0HP Seal, (2) Bearing & Impeller Kit with a 2 1/8" Eye Width... This Impeller fits between the Face and the Volute of a XP2 Wet End found on some Watkins Hot Spring Caldera pumps with Vendor Code 4081...MSRP: $99.99$78.99 -
Fits Some Watkins Hot Spring, Impeller, (1) Bearing & Seal Kit XP2 2.0HP 2 1/8" Eye Vendor # 4081
MSRP: $84.99$68.99This is a Watkins Wavemaster 8000 or 8200 2.0HP Seal, (1) Bearing & Impeller Kit with a 2 1/8" Eye Width... This Impeller fits between the Face and the Volute of a XP2 Wet End found on some Watkins Hot Spring Caldera pumps with Vendor Code 4081...MSRP: $84.99$68.99 -
Wavemaster 5000, Impeller, 1.0HP, Code 4081, 33980, 34677
MSRP: $44.99$34.99This is a 1HP Impeller for a Wavemaster 5000 Code 4081, 33980, 34677 48 Frame Side Discharge pump. This Impeller fits between the Face and the Volute of a Wavemaster 3000 Series Wet End. I would advise replacing the Seal when you replace the Impeller...MSRP: $44.99$34.99 -
Fits Some Watkins Hot Spring, Vendor Code 4081, Shaft Seal & (2) Bearing Kit, Silicon & Tool Buna
MSRP: $54.99$39.99This kit Fits a Watkins, Vendor #4081, found under the name Wavemaster 5000 numbers Features (1) Seal, seal tool, (2) bearings and (1) 1/2 Oz Tube of The Professor's Silly Juice a Specially Formulated for Hot Tubs Silicon Sealer. Note: Watkins...MSRP: $54.99$39.99 -
Fits Some Watkins Hot Spring, Vendor Code 4081, Shaft Seal & (1) Bearing Kit, Silicon & Tool Buna
MSRP: $39.99$29.99This kit Fits a Watkins, Vendor #4081, found under the name Wavemaster 5000 numbers Features (1) Seal, seal tool, (1) bearing and (1) 1/2 Oz Tube of The Professor's Silly Juice a Specially Formulated for Hot Tubs Silicon Sealer. Note: Watkins...MSRP: $39.99$29.99 -
Fits Some Watkins Hot Spring, Vendor Code 4081, Shaft Seal Kit, Silicon & Tool Buna
MSRP: $18.99$15.99This kit is a that Fits Watkins, Vendor #4081, found under the name Wavemaster 5000 numbers Features (1) Seal, seal tool and (1) 1/2 Oz Tube of The Professor's Silly Juice a Specially Formulated for Hot Tubs Silicon Sealer. Note: Watkins used 4...MSRP: $18.99$15.99 -
Out of stock
NLA Wavemaster 5000, Faceplate, Pump Face, 1 1/2" Thread
MSRP: $52.99$41.99This part is no longer available you must buy a complete wet end to get this part. This part is a Faceplate found on Wavemaster 5000 side discharge wet ends.. Drain Plug Location 6,8 o`clockSuction Connection (Physical...MSRP: $52.99$41.99