Jet Pumps, Complete
Jet Pumps, Complete
Read this information to Help to determine the Frame and HP.. The way you can determine whether your pump is a 48 or 56 Frame is by measuring the width of the motor. A 48 Frame motor will measure 5 3/4" wide across the back and a 56 Frame will measure about 6 1/2" wide across the back.
For 230 Volt Pumps Look on the label of the motor for the two amperages if you have a 2 speed pump, if its a single speed look for a single amperage. It will look something like this: 10.0/3.5 The 10.0 is the high amperage in this example.
8.0 = 1 HP
10.0 = 2 HP
12.0 = 3 HP
14.0 = 4 HP
16.0 = 5 HP
For 115 Volt Pumps Look on the label of the motor for the two amperages if you have a 2 speed pump, if its a single speed look for a single amperage. It will look something like this: 10.8/2.8 The 10.8 is the high amperage in this example and would equate to a 1 HP.
8.0 = .5 HP
9.0-10.0 = .75 HP
10.0-13.00 = 1 HP
13.5-15.0 = 1.5 HP
16.0-20.0 = 2 HP
Note: These Amperages are Averages so find the Amperage closest to your pumps Amperage. Note for the Note: 2HP 115V pumps are very rare, do not order one thinking you can add more power. This pump or even a 1.5HP pump will cause your PLug N Play tub to damage the electrical system, Plug, Wires and even the pump motor.
NOTE: Your pump or motor may say a different Horse Power than what you see here, DO NOT go by what is listed on the motor, go by the amperage on the label.
NOTE for the NOTE: TRUST ME ON THIS, everybody lies about their Horse Power. But the amperage does not lie. Most people are told they have 5 HP pumps, if you do the math two 5 HP pumps at 16 amps is 32 amps. Plus a 5.5 KW heater is 21 amps. That means with both pumps running and the heater on it will draw 53 AMPS. I bet your HOT TUB is on a 50 AMP breaker. Therefore contrary to what you have been told you DO NOT have a 5 or 6 or 7 Hp pump.
https://hottubpartsofamerica.com/pumps-and-related-parts/jet-pumps-complete/aqua-flo-complete-pumps/
https://hottubpartsofamerica.com/pumps-and-related-parts/jet-pumps-complete/intertek-lx-chinese-pumps/
https://hottubpartsofamerica.com/pumps-and-related-parts/jet-pumps-complete/sta-rite-complete-pumps/jacuzzi-sundance-complete-pumps/
https://hottubpartsofamerica.com/pumps-and-related-parts/jet-pumps-complete/sta-rite-complete-pumps/
https://hottubpartsofamerica.com/pumps-and-related-parts/jet-pumps-complete/vico-complete-pumps/
https://hottubpartsofamerica.com/pumps-and-related-parts/jet-pumps-complete/waterway-complete-pumps/
https://hottubpartsofamerica.com/pumps-and-related-parts/jet-pumps-complete/watkins-wavemaster-complete-pumps/
- Product
- Qty in Cart
- Quantity
- Price
- Subtotal
-
How To Video Pump Slow Start or Hum on Low Speed Repair Spa Guy
$0.00This video is about The Spa Guy showing How To Repair a Sta-Rite Dura-Jet Pump that either slow starts or Hums on Low Speed but will run on hgih and then on low after being on high but will not run on low from a dead start... it is a similar process on...$0.00Qty in Cart: 0Price:$0.00Subtotal: -
Hotspring, Watkins, Vendor #4081, (1) Bearing, Shaft Seal Kit with Silicon & Tool, Wavemaster
MSRP: $39.99$29.99This Kit Fits Watkins, Vendor #4081, Wavemaster Pumps. This Kit Features (1) Bearing, Seal Tool, Silicone & (1) Seal for Vendor Code #4081 Pumps on Hotspring Watkins Hot Tubs.. Note: Watkins used 5 different Brands of Wet Ends under the Wavemaster...MSRP: $39.99$29.99 -
Set of (2) Hot Tub Spa 2" Slip X 2" Threaded Pump Unions Video How To
MSRP: $23.99$18.99This set is a Set of (2) 2" Slip X 2" Threaded Pump Union with Gasket or O-ring that matches Union. The Union recieves a 2" pipe or fitting on one side and then Screws to a 2" Wetend(Pump) Threaded Part on the...MSRP: $23.99$18.99 -
Barb Adapter, 3/8"b x 1/4"mpt Pump Wet End Face fits Waterway
MSRP: $11.99$8.99This part is a Bleeder Barb that is 3/8" barb x 1/4" Threaded MPT fitting fits Wet End Face Bleeder Plug Holes to attach a Bleeder Line it fits Waterway Executive 48 & 56 Frame Parts & Wetends, Power-Right 9089X, 9094X,...MSRP: $11.99$8.99 -
Drain Plug Adapter, Gecko, AquaFlo XP2, XP2E, 1/4" Barb x 1/4"Mpt, Bleeder, Watkins
MSRP: $13.99$11.99This part is a Pump Bleeder Barb with O-Ring that is found on some Aqua-Flo Xp2 and Xp2e wet ends but is used with an unusual bleeder line.. The line is 1/4" Inside Diameter not 3/8" Inside Diameter like most bleeder lines.. This part does come with the...MSRP: $13.99$11.99 -
2 1/2" Split Nut Kit for Pump Union Emergency Repair
MSRP: $24.99$19.99This part is a 2 1/2" Pump Union Split Nut Repair Kit which includes the split nut and (2) Screws for use with a 2 1/2" Pump Union. The Pump Union Split Nut that measures about 3 3/4" on the outside and mounts to the existing Pump Union Body using 2...MSRP: $24.99$19.99 -
Hot Tub Spa 1 1/2" Slip X 1 1/2" Pump Union with Gasket Video How To
MSRP: $12.99$9.99This part is a 1 1/2" Slip X 1 1/2" Pump Union with Gasket or Oring that matches Union. See Pictures for measurements. The Union receives a 1 1/2" pipe or fitting on one side and then Screws to a 1 1/2" Wet...MSRP: $12.99$9.99 -
1 1/2", Gasket, Heater or Pump, Union, with 1 7/8" Groove How to Video, 1-1/2"
MSRP: $7.99$4.99NOTE: This gasket does not fit your Coleman SALUSPA DO NOT order it.. Click this link to see Saluspa Gaskets.. Saluspa This part is a Standard 1 1/2" Heater or Pump Union Gasket. The gasket is 2 3/8" across and fits unions that have a 1...MSRP: $7.99$4.99 -
Hot Tub Spa 2" Slip X 2" Threaded Pump Union & Gasket How To Video
MSRP: $12.99$9.99This part is a 2" Slip X 2" Threaded Pump Union with Gasket or O-ring that matches Union. The Union receives a 2" pipe or fitting on one side and then Screws to a 2" Wetend(Pump) Threaded Part on the other...MSRP: $12.99$9.99 -
(1X) 2" Split Nut Kit for Pump Union Emergency Repair Video How To
MSRP: $14.99$11.99This part is a 2" Pump Union Split Nut Repair Kit which includes the split nut and (2) Screws for use with a 2" Pump Union. The Pump Union Split Nut that measures about 3" on the Inside of the Threaded Side and mounts to the existing Pump Union Body...MSRP: $14.99$11.99 -
Hot Tub Spa 2" Heater or Pump Union Gasket 2 1/2" Lip Balboa Gecko ACC Video How To
MSRP: $7.99$4.99This part is a Standard 2" Heater or Pump Union Gasket with a 2 1/2" Lip Center to Center. The gasket is 2 7/8" across on the outside the inside diameter is about 2 3/16" and the lip that fits into the union is 2 1/2" center to...MSRP: $7.99$4.99