Bath Garden Tub Pumps & Related Parts

NOTE: This gasket does not fit your Coleman SALUSPA DO NOT order it.. Click this link to see Saluspa Gaskets.. Saluspa This is a Set of 2X Universal 1 1/2" Pump Union Gasket/O-Ring Kit. 6 Items total..  There are three possible sizes on a...

NOTE: This gasket does not fit your Coleman SALUSPA DO NOT order it.. Click this link to see Saluspa Gaskets.. Saluspa This is a Universal 1 1/2" Pump Union Gasket/O-Ring Kit. There are three possible sizes on a 1 1/2" Pump union measuring in the...

This part is a Union Tee, Balboa Vico Ultima/UltraFlo, 1-1/2"fbt x 1"slip x 1"slip.. This part is usually found in a garden bathtub setup not a hot tub in your backyard..  The threaded Pump Union part measures 2 3/8" across the threads and the...

NO Longer Available.. This Part is a Bath Pump Seal for a LX, DH1.0 Series Guangdong Bath Garden Tub Pump Only. It is 1 3/16" Across the back of the Spring Seal part that goes onto the back of the impeller with a hole size of about 5/8"..  The...

This part is (1) 1/8"x 1/8" X 1/8" Barbed Tee In-line Air Bleed that fits 1/8" OD , 3/16" ID Clear Hose on each side. These Will prevent very sensitive air switches from randomly activating due to thermal expansion of air and water vapor..  

This part is a Set of (2) 1 1/2" Slip X 1 1/2" Pump Unions with Gasket or O_Ring that matches Unions. See Pictures for measurements. The Union receives a 1 1/2" pipe or fitting on one side and then Screws to a 1...

This part is a 10' section of Air Tubing 1/8" inside diameter is used with Air Button, Air Button Style Topsides and Air Switch Applications and between Garden Tub Pumps and Air Button Switches...   Air Tubing Inside...

Low profile button minimizes the risk of false actuationMounting hole 1-5/8"

This part is a 100 ft roll of Air Tubing 1/8" Inside Diameter is used with Air Buttons, Air Button Style Topsides and Air Switch Applications and between Garden Tub Pumps and Air Button Switches... Air Tubing Inside Diameter 1/8" Tubing...

Flush mount air buttonA great replacement for Martec buttons above. Bellows are accessible fromthe top&ndash no need to remove button!Hole size: 1-1/2"

TBS 300 Series Air SwitchAvailable in single or double pole, latching or momentary contacts, and are compact in size. Wire connects are 5/16" male quick connect tabs and required panel hole is 5/8"25ampSPNOLatching

You are buying (1) Bearing that fit some motors that are used in hot tubs, usually small 48 frame motors and some circulation pumps, this bearing is 15.9MM ID x 40MM OD. Some of the motors this fits are A.O.Smith/Regal Beloit, Century/Regal Beloit,...