Pumps and Related Parts

This Kit is a Set of 2 NON-Standard 2" Heater or Pump Union O-Ring that measures 2 5/8" Center to Center. The O-Ring is 2 5/8" center to center and fits some unions but most unions are 2 1/2" center to center... Do not buy this O-Ring...

Note: When you order this pump you will receive the newest version of the pump which is a baseless 2.5 HP pump and you will receive the base as well.. This will be able to be installed in any position but you will have to install the base which may not...

This part is a Stronger Pump Bleeder Barb that fits some Watkins Wavemaster XP2, XP2E, LX and others.. It is 1/4" Barb x 1/4"Npt and is used with an unusual bleeder line.. The line is 1/4" Inside Diameter not 3/8" Inside Diameter like most bleeder lines....

This 90 Tee Kit is exclusively for HotSpring Hot Tubs made by Watkins and can be found under the name Hotspring, Solana, Tiger River, Caldera... This is not a Watkins Brand Part.. This Item is the 90 Ell found on the pressure side of a Laing pump...

This part is a Bleeder Barb with Silicone & O-Ring that is 3/8" barb x 1/4" Threaded MPT fitting fits Wet End Face Bleeder Plug Holes to attach a Bleeder Line it fits Waterway Executive 48 & 56 Frame Parts &...

This part is a Bleeder Barb with O-Ring that is 3/8" barb x 1/4" Threaded MPT fitting fits Wet End Face Bleeder Plug Holes to attach a Bleeder Line it fits Waterway Executive 48 & 56 Frame Parts & Wetends, Power-Right 9089X, 9094X,...

Red Epoxy is a new high performance, two-part, heat cured, epoxy repair kit for making permanent repairs on all metals and rigid plastics. Red Epoxy is specifically designed to exhibit a distinct color change when heat cured. Red Epoxy will provide a...

This part is a Pump Bleeder Barb for some Watkins Wavemaster LX Pumps and others.. It is 1/2" Barb x 1/4"Mpt and is used with an unusually large bleeder line.. The line is 1/2" Inside Diameter not 3/8" Inside Diameter like most bleeder lines.. This...

// This is an LX Pump 230V WE-14 circulation pump is a close replacement for the E-14 Pump if you have room.. Look at the pictures and measurements to see if this can be using in place of your original E-14 pump.. DO NOT ORDER WIHOUT...

This Seal Kit for 6500-907 LX CIRCULATION PUMP 230V 2006+ JACUZZI® J-400 PREMIUM SUNDANCE® Pumps Only. It is 1 39/64" Across the back of the Spring Seal part that goes into the volute or wetend back and the Ceramic & Rubber part that...

This Seal Set is used ONLY in Intertek WTC50 Pumps Only. It is 1 39/64" Across the back of the Spring Seal part that goes into the volute or wetend back and the Ceramic & Rubber part that goes into the impeller is 1 11/32". The Hole in the...

This motor is for either a Vertical or Horizontal Mount Aqua Flo Circ Master CMVP, CMCP or CMHP 230 Volt Pump 1/12 or 1/15th HP .067 Amps 1 Speed.. Since the FMVP Pump has been discontinued this is a way you can do the repair.. You can choice parts for...