Pumps and Related Parts

Note: Before You Buy This Part be sure it is correct..It would be very rare for this to be your heater nut unless you have Swim Spa with a very large 3" heater... These are found in some smaller hot tubs but is very rare. Watch the video and Check the...

  Note: Before You Buy This Part be sure it is correct..It would be very rare for this to be your heater nut unless you have Swim Spa with a very large 3" heater... These are found in some smaller hot tubs but is very rare. Watch the video and...

This par is a Set of (2) 2 1/2" Heater Nut Kit which includes the nut, split retainer and a Waterway Style gasket for use with a 2 1/2" Waterway Heater Union. Note: You need to measure your T gasket bead part that fits into the groove to be sure...

This Kit is a Set of (2) 1"FTB X 1" Barb Pump Unions with O-ring that matches the Unions.   Note: This part now comes in two pieces as the oroginal verions made together is obsolete..   The Union receives a 1" Inside Diameter Hose which...

You are buying a set of (2) 1"FTB X 3/4" Barb Pump Unions with O-ring that matches the Unions. The Union receives a 3/4" Inside Diameter Hose which measures about 1" on the outside and then Screws to a 1" Wetend (Pump) Threaded...

You are buying a Set of (2) 1"FTB X 1" Slip Pump Unions with O-ring that matches the Unions. The Union receives a 1" Inside Diameter which measures about 1 1/4" on the outside pipe or fitting on one side and then Screws to a...

This Kit is a Set of (2) Jacuzzi J Pump Style Pump Unions with 1 1/2" Slice Valves. The 1 1/2" Slice valve will glue inside the J pump union then you glue your 1 1/2" pipe which measures about 1 7/8" OD into the slice valve. The J Pump Union receives...

This Kit is a 1 1/2" Spigot X 1 1/2" Slip Slice Gate Valve and Jacuzzi® J Style Pump Union with O-Ring that matches Union. The Valve receives a 1 1/2" pipe or fitting on one side that would measure 1 7/8" ID and then...

You are buying a Kit that consists of (2) 2" Spigot X 2" Slip Slice Gate Valves and (2) 2" Pump Unions with Gasket or O-Ring that matches Unions. The Valve receives a 2" pipe or fitting on one side and then slips inside of a 2"...

You are buying a Kit that consists of a 2" Spigot X 2" Slip Slice Gate Valve and a 2" Pump Union with Gasket or Oring that matches Union. The Valve receives a 2" pipe or fitting on one side and then slips inside of a 2"...

This part is a Set of (2) 1 1/2" Slip X 1 1/2" Pump Unions with Gasket or O_Ring that matches Unions. See Pictures for measurements. The Union receives a 1 1/2" pipe or fitting on one side and then Screws to a 1...

This set is a Set of (2) 2" Slip X 2" Threaded Pump Union with Gasket or O-ring that matches Union. The Union recieves a 2" pipe or fitting on one side and then Screws to a 2" Wetend(Pump) Threaded Part on the...