Pump, Waterway Executive, 1.5hp, 115v, 2-spd, 48fr, 2 1/2" x 2"

(1 review) Write a Review
SKU:
HTP34206BE-13
Shipping:
Calculated at Checkout
  • Pump, Waterway Executive, 1.5hp, 115v, 2-spd, 48fr, 2 1/2" x 2"
  • Pump, Waterway Executive, 1.5hp, 115v, 2-spd, 48fr, 2 1/2" x 2"
  • This pump is a very unusual one as it has a 2 1/2" Suction Side which measures about 3 1/2" edge to edge on the threads on the front suction side and 2" on the pressure side top which measures about 3" edge to edge..
  • This pump is a very unusual one as it has a 2 1/2" Suction Side which measures about 3 1/2" edge to edge on the threads on the front suction side and 2" on the pressure side top which measures about 3" edge to edge..
  • Pump, Waterway Executive, 1.5hp, 115v, 2-spd, 48fr, 2 1/2" x 2"
MSRP: $596.99
$459.99
— You save $137.00

Description

This is a Waterway Executive 115V 1 .5HP 48fr 2 1/2" x 2".. This pump is a very unusual one as it has a 2 1/2" Suction Side which measures about 3 5/8" edge to edge on the threads on the front suction side and 2" on the pressure side top which measures about 3" edge to edge..

Note: I have seen this pump in Phoenix brand Spa Titanium series with a 56fr sticker on them but it is definitely a 48 frame..

Complete Pump Type    Portable Spa Pump
Speed    2 Speed (2-Spd)
Motor Voltage    115v
Drain Plug Location    3,6,9 o`clock
Pump to Motor Foot Types    4a
Suction Style    Center
Suction Connection (Physical Dimension)    3-11/16"od
Suction Connection Type    Male Buttress Thread (mbt)
Suction Pipe Size    2-1/2"
Discharge Style    Side
Discharge Connection (Physical Dimension)    3-1/16"od
Discharge Connection Type    Male Buttress Thread (mbt)
Discharge Pipe Size    2"
Horsepower    1.5SPL
Motor Frame    48 Frame Thru-Bolt
Motor Amperage/Wattage    13.3A/4.1A
Manufacturer    Waterway
Pump Model    Executive
Manufacturer Impeller Number    310-4210 (2.0hp)
Volute Fastening Type    8 Screws
Volute/Sealplate Number    315-1240

View AllClose

1 Review

  • 5
    Great product

    Posted by Mark A Vasquez on Jan 28th 2019

    The pump and motor worked perfect. I would have loved it more if it came with some kind of instructions, but I was able to get by, however, the nipple I had to transfer from the old pump to the new one broke upon installing it into the new pump. This should come with the pump since its new. I bought one from Low's and installed it. It would not screw into the new pump, so I had to use the face of the old one and it worked fine. A small plastic part would have made installation much much easier. Other than that it worked perfectly, I love it.

View AllClose