Pump, LX, Sundance, Jacuzzi, 48Fr, SD, 2.0HP, 2Spd, 230V, 10.0/3.0A, Bracketless, 48WUA2002C-II, 6500-343, 6500-092

(No reviews yet) Write a Review
SKU:
HTP34-343-AEAK/48WUA2002CIISUN
Shipping:
Calculated at Checkout
  • Pump, LX, Sundance, Jacuzzi, 48Fr, SD, 2.0HP, 2Spd, 230V, 10.0/3.0A, Bracketless, 48WUA2002C-II, 6500-343, 6500-092
  • Pump, LX, Sundance, Jacuzzi, 48Fr, SD, 2.0HP, 2Spd, 230V, 10.0/3.0A, Bracketless, 48WUA2002C-II
  • The Suction and Pressure side thread fittings are called 2" x 2" but measure 3" from the edge of the thread to the edge of the thread.
  • The Suction and Pressure side thread fittings are called 2" x 2" but measure 3" from the edge of the thread to the edge of the thread.
  • This pump requires this type of bracket to be mounted. You can reuse your original if yours is in good shape.. Bracket NOT included..
  • Pump, LX, Sundance, Jacuzzi, 48Fr, SD, 2.0HP, 2Spd, 230V, 10.0/3.0A, Bracketless, 48WUA2002C-II
  • Pump, LX, Sundance, Jacuzzi, 48Fr, SD, 2.0HP, 2Spd, 230V, 10.0/3.0A, Bracketless, 48WUA2002C-II
  • Pump, LX, Sundance, Jacuzzi, 48Fr, SD, 2.0HP, 2Spd, 230V, 10.0/3.0A, Bracketless, 48WUA2002C-II
MSRP: $499.99
$389.99
— You save $110.00

Description

This part is a 2.0 Horse Power 10.0/3.0 Amp (2) Speed 48 Frame Complete Baseless Bracketless Pump found in some Sundance or Jacuzzi Hot Tubs. These pumps usually have the part number 48WUA2002C-II and or 6500-343, 6500-092 on the label. The Suction and Pressure side thread fittings are called 2" x 2" but measure 3" from the edge of the thread to the edge of the thread.

If your original Wet End has a Bleeder Barb and the heads of the Bleeder Screws in your old wet end have a spot for a flat screw driver you will need a new bleeder barb... If the original has a wing nut style you already have the newer style bleeder barb and will only need a new one if your original one breaks..

 

 

img-0842-clipped-rev-1.pngimg-0877-clipped-rev-1.pngimg-0847-clipped-rev-1.png

 

Click this link for the new Style Bleeder Barb: Barbed Bleeder Plug Intertek LX 48 or 56 Frame Wet End Fine Threads Jacuzzi® or Sundance®

This model LX pump is commonly used to replace Sundance 2.0 HP 230 Volt 48 frame pump, 2 speed, 2" inlet, 2" discharge pumps 

Dimensions: 17-1/2"L x 8-7/16"W x 8-7/16"H


NOTE: This Pump Requires a Base that wraps around the body of the motor to mount it.. Click here for the link to the bracket: Base Mounting Bracket, Pump, LX, Sundance, Jacuzzi, 48 Frame

 

Manufacturer Lingxiao (LX) Pump
Pump Model 48WUA
Speed 2 Speed (2-Spd)
Motor Voltage 230v
Drain Plug Location 3,6,9 o`clock
Suction Style Center
Suction Connection Type Male Buttress Thread (mbt)
Suction Pipe Size 2"
Discharge Style Side
Discharge Connection Type Male Buttress Thread (mbt)
Discharge Pipe Size 2"
Horsepower 2.0hp
Motor Frame 48 Frame Thru-Bolt
Motor Amperage/Wattage 10.0A/3.0A


View AllClose