Pump, LX, Sundance, Jacuzzi, 48Fr, SD, 2.0HP, 1Spd, 230V, 10.0A, Bracketless, 48WUA2002C-II, 6500-091 , 6500-097 , 6500-341 , 6500-349

This part is a 2.0 Horse Power 10.0 Amp (1) Speed 48 Frame Complete Baseless Bracketless Pump found in some Sundance or Jacuzzi Hot Tubs. These pumps usually have the part number 48WUA2002C-II and or 6500-091 , 6500-097 , 6500-341 , 6500-349 on the label. The Suction and Pressure side thread fittings are called 2" x 2" but measure 3" from the edge of the thread to the edge of the thread.

If your original Wet End has a Bleeder Barb and the heads of the Bleeder Screws in your old wet end have a spot for a flat screw driver you will need a new bleeder barb... If the original has a wing nut style you already have the newer style bleeder barb and will only need a new one if your original one breaks..

Click this link for the new Style Bleeder Barb: Barbed Bleeder Plug Intertek LX 48 or 56 Frame Wet End Fine Threads Jacuzzi® or Sundance®

This model LX pump is commonly used to replace Sundance 2.0 HP 230 Volt 48 frame pump, 2 speed, 2" inlet, 2" discharge pumps 

Dimensions: 17-1/2"L x 8-7/16"W x 8-7/16"H

NOTE: This Pump Requires a Base that wraps around the body of the motor to mount it.. Click here for the link to the bracket: Base Mounting Bracket, Pump, LX, Sundance, Jacuzzi, 48 Frame