Pump, Circulation, Aqua-Flo CMXP, 1/15hp, 230v, 2" X 2", Replacement for Power Right PRCB539X

(No reviews yet) Write a Review
SKU:
HTP0609AEEE-LEEE,PUM22100955
Shipping:
Calculated at Checkout
  • Pump, Circulation, Aqua-Flo CMXP, 1/15hp, 230v, 2" X 2", Replacement for Power Right PRCB539X
  • This is the original Power Right PRCB539X pump in a Cal Spa That this pump replaces.. 
Do Not get it confused with a 1 1/2" Version..
  • This is the original Power Right PRCB539X pump in a Cal Spa That this pump replaces.. 
Do Not get it confused with a 1 1/2" Version..
  • Pump, Circulation, Aqua-Flo CMXP, 1/15hp, 230v, 2" X 2", Replacement for Power Right PRCB539X
  • Pump, Circulation, Aqua-Flo CMXP, 1/15hp, 230v, 2" X 2", Replacement for Power Right PRCB539X
  • Pump, Circulation, Aqua-Flo CMXP, 1/15hp, 230v, 2" X 2", Replacement for Power Right PRCB539X
  • Pump, Circulation, Aqua-Flo CMXP, 1/15hp, 230v, 2" X 2", Replacement for Power Right PRCB539X
MSRP: $579.99
$439.99
— You save $140.00

Description

This circulation pump is a 230V Replacement for a Power Right pump found in some Cal Spas.. This Pump is a 2" X 2" Wet End which measures about 3" edge to edge across the threads..

This pump is a 48 frame 230V Side Discharge wet end with a 2" suction side and 2" pressure side which measures about 3" edge to edge.

Note: You need to be sure of your voltage by checking one of two things. Either the label on the pump which will say either 115V or 230V or you can look to see where the white wire from the pump is located in the pack if you can't see the label. If the white wire is on the red leg or #2 leg the pump is 230V if it is on the Neutral or the White AC leg. Always turn the breaker to the hot tub off before doing any of these checks.  

 

Pump Brand:Aqua-Flo
Pump Horsepower:1/15 HP
Pump Voltage:230 Volt
Pump Model:CMXP2
Amperage:0.6 Amp
Speeds:1 Speed
Cord Style:Blank
Discharge Location:Side
Plumbing Size:2" MBT

IMPORTANT MOTOR VARIATION NOTICE

Due to ongoing changes in the hot tub pump industry since COVID, motor appearance and configuration may vary, even when the part number is the same. While the pump wet end will be correct, the motor may differ in areas such as capacitor location, labeling, or housing.

If you have a specific motor requirement (clearance, capacitor position, orientation, etc.), you must contact us before ordering so we can verify availability. Do not order first and contact us after delivery due to appearance differences.

Motor variations are outside of our control and may change week to week. Appearance differences do not constitute an incorrect item if specifications are met.

 

View AllClose