PVC Plumbing Fittings
This is a chart for the outside of your plumbing pipes so you can figure out what size parts to order. Note: The actual size a part is called is not the actual size of the hole in the part it is really the Inside Diameter of the pipe that would glue into that part which doesn’t make sense, since you cannot see inside the pipe. Therefore I am giving you the measurements of the outside of the pipe so you know what size part to order. For example a part that is ½” plumbing would glue in to, would actually measure ¾” inside the hole of the part and on the outside of the pipe that glues into the part.
Pipe Outside Diameter chart:
½” Outside Diameter is ¾”
¾” Outside Diameter is 1”
1” Outside Diameter is 1 ¼”
I have never seen 1 ¼” in Hot Tubs
1 ½” Outside Diameter is 1 ⅞”
2” Outside Diameter is 2 ⅜”
2 ½” Outside Diameter is 2 ⅞”
Note: When gluing New Valves to old plumbing you need to "Spin It To Win It" so you don't have any leaks so watch the video on "Spin It To Win It" glue techniques. Please don't be a drip, "Spin It To Win It"
- Product
- Qty in Cart
- Quantity
- Price
- Subtotal
-
2" Female Pipe Thread X 2" Slip Coupler Plumbing PVC Fitting
MSRP: $11.99$8.99This part is a (1) 2" Femail Pipe Thread X 2"Slip Coupler PVC Plumbing Fitting. The Coupler receives a 2" threaded fitting which measures about 2 3/8" OD on one side and then receives a 2" fitting which measures 2 3/8" OD on the other...MSRP: $11.99$8.99 -
Hot Tub Manifold Repair Tool, Cutter, Vinyl and Hose, Cuts 3/8" Up to 1" Vinyl and Flex
MSRP: $29.99Now: $9.99Was: $19.99This tool is a Flex Pipe or Vinyl Tubing Cutter works on air line 3/8" up to water lines 1".. 3/8" air, 1/2" Water, 3/4" Water Vinyl or Flex and 1" Water Vinyl or Flex.. Tool Type Group PlumbingTool Type Tubing...MSRP: $29.99Now: $9.99Was: $19.99 -
Barb Adapter with Silicone & O-Ring, 3/8" Barb x 1/4" MPT Pump Wet End Face fits Waterway
MSRP: $13.99$9.99This part is a Bleeder Barb with Silicone & O-Ring that is 3/8" barb x 1/4" Threaded MPT fitting fits Wet End Face Bleeder Plug Holes to attach a Bleeder Line it fits Waterway Executive 48 & 56 Frame Parts &...MSRP: $13.99$9.99 -
Air Check Valve 1" Slip Used with Air System that have No Air Valves
MSRP: $11.99$9.99This part is an Air Check Valve with a 1" Slip Fittings on one end. This valve is used above the water line to allow constant air flow in one direct and to stop water flow in the other direction when plumbed properly in a Hot Tub. This type Check...MSRP: $11.99$9.99 -
1/2" or 3/4" Soft Pipe Connection Kit, Use this to connect old 1/2" or 3/4" Flex to New Plumbing Parts..
MSRP: $14.99$9.99This Kit consists of 4" of 3/4" Inside Diameter Clear Tubing, (2) Clamps and (2) 1" Street x 3/4" Barb Couplers.. This Kit is used to connect your 3/4" pipe connection that is being replaced to a more modern outside barb type seal... You achieve the 3/4"...MSRP: $14.99$9.99 -
3/4" Tubing Barb Connect Kit, 3/4" Barb x 3/4" Smooth Barb with Clamps and Tubing
MSRP: $13.99$9.99This Kit is a Barb Coupler, Tubing and Clamps.. (1) Kit with 3/4" x 3/4" Smooth Barb with 6" of 3/4"ID Tubing and (2) 3/4" Roto Clamps used to extend a 3/4" tube to Barb connection..MSRP: $13.99$9.99 -
45, Elbow, Ell, 2" Spigot x 2" Slip, Street X Slip, With Pressure Switch Threaded Hole
MSRP: $12.99$8.99This part is a 45 Degree 2" Street X 2"Slip PVC Plumbing Fitting that has a Threaded hole for a Pressure Switch. The Union glues into a 2" fitting on one side and then receives the fitting on the other side. It will Glue into any 2" fitting to make a...MSRP: $12.99$8.99 -
Barb Adapter, 3/4" Barb x 2" Spigot for Water Manifolds
MSRP: $13.99$8.99This Kit is a Barb Adapter, 3/4" Barb x 2" Spigot... that will glue inside of a 2" Slip Manifold or other 2" Slip fitting and is usually used to couple a 3/4" water tube back to the barb on the fitting.. Also Note: If you order a manifold kit that...MSRP: $13.99$8.99 -
Set of (3) Barb Plugs 3/8" Slip for Air Manifold and more Waterway
MSRP: $14.97$9.99This is a Set of (3) barb plugs used to plug off a 3/8" port on Air manifolds or Air Sides of Jet Bodies that are above the water line of the tub. We offer many different plugs based on the brand of manifold.MSRP: $14.97$9.99 -
1-1/2" Coupler and Flex Pipe Kit to Spin To Win It for Manifolds, Slice Valves or Unions
MSRP: $14.99$9.99This Kit is a 1 1/2" Coupler and a 6" Piece of 1 1/2" Flex Pipe used when gluing new plumbing to old plumbing. We call this Technique "Spin it To Win it" Meaning you spin the coupler onto the old plumbing when you are gluing new to old and then purple...MSRP: $14.99$9.99 -
1/2" Flex Pipe, 12" length for Manifolds ,Jet Bodies and Other Fittings
MSRP: $13.99$8.99This part is a 12" Piece of 1/2" Flex Pipe used with 1/2" Manifolds, Jet Bodies and other fittings...... 740016011378,DW-17ST R , DW-17ST-ZD,89-555-1105,1.062",hose clamp,pipe,pipe clamp,clamp,roto,roto...MSRP: $13.99$8.99 -
3/4" Flex Pipe, 12" length for Manifolds ,Jet Bodies and Other Fittings
MSRP: $13.99$8.99This part is a 12" Piece of 3/4" Flex Pipe used with 3/4" Manifolds, Jet Bodies and other fittings.. 740016011378,DW-17ST R , DW-17ST-ZD,89-555-1105,1.062",hose clamp,pipe,pipe clamp,clamp,roto,roto...MSRP: $13.99$8.99