PCB, Waterway NEO 2100, Daughter Board 2 (DB-2)
- SKU:
- HTP59-270-3006/775-BKBL
- Shipping:
- Calculated at Checkout
Description
Daughter Board 2 (DB-2) Kit for Waterway NEO 2100 Spa Control System. Used to add (2) extra 2-Speed pumps to the system.
Kit Includes: (3) 1/4" Hex #6-32 x 1.5" Standoffs, (3) Screws and (1) Zip Tie.
NOTE: WE DO NOT ACCEPT RETURNS ON ELECTRICAL PARTS..
| Circuit Board Application | Waterway |
| Circuit Board Model | NEO 2100 DB-2 |
| Circuit Board Type | New |
| Manufacturers Part Number | 775-EKEL |
| Circuit Board Accessory | Daughter Board |
Related Products
PCB, Waterway NEO 2100, Daughter Board 1 (DB-1)
MSRP:
$194.99
$149.99
This part is a Daughter Board 1 (DB-1) Kit for Waterway NEO 2100 Spa Control System. Used to add an extra 2-Speed pump to the system.Kit Includes: (3) 1/4" Hex #6-32 x 1.5" Standoffs, (3) Screws and...
Out of stock
PCB, Waterway NEO 2100, Controller Board Assy, REV D
MSRP:
$494.99
$369.99
This part is a Waterway Neo 2100 Series replacement board Revision D..
Out of stock
Sensor, Waterway NEO 2100, Temperature, 10kW
MSRP:
$49.99
$39.99
Waterway NEO 2100 ETS (Electronic Thermal Sensing) Temperature Sensor. Similar to Balboa's M7™ Technology, the NEO 2100 uses (2) ETS sensors to determine the water temperature.
Out of stock
Sensor, Waterway NEO 2100, Hi Limit, 10kW
MSRP:
$44.99
$34.99
Waterway NEO 2100 ETS Hi-Limit Sensor.
These sometimes have 773-0377 on the part..
Heater, FloThru, Waterway NEO Series, 15" x 2", 5.5kW
MSRP:
$394.99
$334.99
This part is a 5.5kw 15" long Heater Flo Thru Tube found in Waterway Neo Series control packs..
You can replace just the element and not the tube and save some money the kit can be found here:
Pump, Waterway Executive, 1.5hp, 115v, 2-spd, 48fr, 2" x 2"
MSRP:
$596.99
$474.99
This pump is a 115V 48 Frame 2" X 2" Waterway Executive (2) Speed 1.5HP 13.3Amp on High and 4.1A on Low..
The Pressure and Suction sides measure about 3" edge to Edge across the threads....
Pump, Waterway Executive, 4.0hp, 230v, 2-spd, 56fr, 2-1/2" x 2"
MSRP:
$544.99
$499.99
This Listing is for a Waterway Executive 56fr 2 Speed 230V 3 HP 2 1/2" X 2" Pump.
Your sticker may say 4HP but based on the chart it is really a 3HP at 12 Amps. This unit features a 2 1/2" X 2"...
Viper, Volute, Waterway, Pump 2 1/2" x 2 1/2" Wet End
MSRP:
$84.99
$64.99
Waterway Viper Pump Volute fits on the front of a Viper Pump exclusively for A Waterway Viper pump which has 2 1/2" inlet and outlet which measures about 3 9/16" across the threads...
Click Here for...
Pump, Waterway Executive, 1.5hp, 115v, 2-spd, 48fr, 2 1/2" x 2"
MSRP:
$596.99
$459.99
This is a Waterway Executive 115V 1 .5HP 48fr 2 1/2" x 2".. This pump is a very unusual one as it has a 2 1/2" Suction Side which measures about 3 5/8" edge to edge on the threads on the front...