Balboa VS System Heater Parts List

This Kit is a 2" Heater Union, Slice Valve, Spin Kit To Plumbing Connect Kit found in many Hot Tubs. The Heater Union which measures about 3" outside the threads receives a 2"street X 2" Slip Slice Valve then you glue the 2" coupler to spin it to win it...

This part is a Kit which includes (2) 2" which measure about 3" ID Heater Split Nuts, (4) Screws and (2) Gaskets for use with a 2" Heater Tube & Union. The Heater Flange Split Nut mounts to the heater tube using 2 screws to hold it in place and...

This part is a 2" which measures about 3" ID Heater Split Nut Kit which includes the split nut , (2) Screws and a gasket for use with a 2" Heater Union that would measure about 3" Edge to Edge on the threaded side. The Heater Flange Split Nut mounts to...

This part is a Balboa Heater Tube M7 Sensor Mount only. This Mount is screwed into the heater tube and the M7 sensor is slid down in the mount and screwed onto the mount. It DOES NOT include the tube or the sensor they are included in the pictures to...

This part is a Balboa Heater M7 Sensor. This Sensor comes with the wire, Connector, and The Screw down cap. It DOES NOT include the tube and the tube side mount. You will normally not need the sensor mount you would reuse it so there is no reason to...

This part is a Standard Balboa Heater M7 Sensor with a 24" wire. This Sensor comes with the wire, Connector, and The Screw down cap. It DOES NOT include the tube and the tube side mount. You will normally not need the sensor mount you would reuse it so...