Hot Tub Gaskets and O-Rings

This Part is a Set of (2) NON-Standard 2" Heater or Pump Union Gasket with a 2 5/8" Center to Center Lip. The gasket is 2 7/8" across on the outside the inside diameter is about 2" and the lip that fits into the union is 2...

This Kit is a Combination of the Two Standard Size 2" Heater or Pump Union Gasket (1) with a 2 1/2" Lip Center to Center and (1) with a 2 5/8" Lip Center To Center. The purpose of this Combo Kit is if you don't know which size you have...

This Kit is a Set of (2) NON-Standard 2" Heater or Pump Union O-Ring that measures 2 5/8" Center to Center. The O-Ring is 2 5/8" center to center and fits some unions but most unions are 2 1/2" center to center... Do not buy this...

This Kit is a Set of 2 NON-Standard 2" Heater or Pump Union O-Ring that measures 2 5/8" Center to Center. The O-Ring is 2 5/8" center to center and fits some unions but most unions are 2 1/2" center to center... Do not buy this O-Ring...

This Kit is a Set of 2 NON-Standard 2" Heater or Pump Union O-Ring that measures 2 5/8" Center to Center. The O-Ring is 2 5/8" center to center and fits some unions but most unions are 2 1/2" center to center... Do not buy this O-Ring...

This part is a Set of (10) Standard 2" Heater or Pump Union Gasket with a 2 1/2" Center to Center Lip. The gasket is 2 7/8" across on the outside the inside diameter is about 2 3/16" and the lip that fits into the union is 2 1/2"...

This part is a Set of (8) Standard 2" Heater or Pump Union Gasket with a 2 1/2" Lip Center to Center. The gasket is 2 7/8" across on the outside the inside diameter is about 2 3/16" and the lip that fits into the union is 2 1/2"...

This part is a Set of (6) Standard 2" Heater or Pump Union Gasket with 2 1/2" Center to Center Lip... The gasket is 2 7/8" across on the outside the inside diameter is about 2 3/16" and the lip that fits into the union is 2 1/2"...

This part is a Set of (4) Standard 2" Heater or Pump Union Gasket with a 2 1/2" Center to Center Lip. The gasket is 2 7/8" across on the outside the inside diameter is about 2 3/16" and the lip that fits into the union is 2 1/2"...

This part is a Set of (3) Standard 2" Heater or Pump Union Gasket with a 2 1/2" center to Center Lip.. The gasket is 2 7/8" across on the outside the inside diameter is about 2 3/16" and the lip that fits into the union is 2 1/2"...

Watkins Replacement ManifoldFor 1.5kW/120v heater assemblies. Available with 1/2" ports or 3/4" portsElement sold separately

5"x 5"Flange ElementWelded construction most commonly used in plastic manifolds such as Brett Aqualine, Premier, Allstate, and Hot Water products. Dual 5/16" thermowells, studs for thermodisc, 1/8"npt pressure switch tap, hole for current collector bolt...