NLA Intertek LX Pump Face 2" WUA 48 & 56 Frame Replacement Face Fine Bleeder Threads
- SKU:
- HTP6500-HE4
- Shipping:
- Calculated at Checkout
-
Intertek LX Pump Face 2" WUA 48 & 56 Frame Replacement Face Fine Bleeder Threads Note: This face does not come with the bleeder plugs or the outside O-ring... See below in the description for the other parts..
-
Note: If your original face looks like the left face in the back with the wear ring built in you will need to purchase a wear ring because the replacements faces do have the wear ring built in.. The link is in the the description area..
-
This is the way the new face, Wear ring and impeller fit together.. For illustration only the impeller and wear ring are not included in this listing..
-
This is the way the original old style faces fit together with the wear ring made into the back of the face.. The new face will not have that ring made in it you will need to purchase a wear ring too.. You can find the link in the description area of this part.. Impeller sold separately..
-
NOTE: If your original Plug looks like this then this is the correct Face plate... Look for a 56 Frame Face if it uses the other type plug.. See the other Plug for the other thread style...
-
This Face fits a pump that looks like this...
-
Intertek LX Pump Face 2" WUA 48 & 56 Frame Replacement Face Fine Bleeder Threads
-
Intertek LX Pump Face 2" WUA 48 & 56 Frame Replacement Face Fine Bleeder Threads This is a 2" connection which actually measures 3" across the threads...
-
Compare your screws to be sure that this is the correct wet end brand before you choose this face.
-
NOTE: If your original Plug looks like this then this is NOT the correct Face plate... See the 56 Frame Lx Guangdong Face Plate for the other thread style...
-
NOTE: If your original Plug looks like this then this is NOT the correct Face plate... See the 56 Frame Lx Guangdong Face Plate for the other thread style...
-
NOTE: If your original Plug looks like this then this is the correct Face plate... Look for a 56 Frame Face if it uses the other type plug.. See the other Plug for the other thread style...
-
NOTE: If your original Plug looks like this then this is the correct Face plate... Look for a 56 Frame Face if it uses the other type plug.. See the other Plug for the other thread style...
-
Compare your wet end to this picture to be sure that this is the correct wet end before choosing this face.
-
Compare your motor shaft to these to be sure you are working on the correct wet end before ordering this face..
-
Guangdong LX Pump Face 2" WUA 48 & 56 Frame Replacement Face Fine Bleeder Threads
-
Guangdong LX Pump Face 2" WUA 48 & 56 Frame Replacement Face Fine Bleeder Threads
-
Guangdong LX Pump Face 2" WUA 48 & 56 Frame Replacement Face Fine Bleeder Threads
-
Guangdong LX Pump Face 2" WUA 48 & 56 Frame Replacement Face Fine Bleeder Threads
-
Guangdong LX Pump Face 2" WUA 48 & 56 Frame Replacement Face Fine Bleeder Threads
-
Guangdong LX Pump Face 2" WUA 48 & 56 Frame Replacement Face Fine Bleeder Threads This is a 2" connection which actually measures 3" across the threads...
-
NOTE: If your original Plug looks like this then this is the correct Face plate... See the 48 Frame Face Plate for the other thread style...
-
Guangdong LX Pump Face 2" WUA 48 & 56 Frame Replacement Face Fine Bleeder Threads
Description
This part is no longer available.. The only solution is a complete wet end..
This Part is a 48 or 56 Frame Face Plate for an Intertek LX Brand Pump Wet End only this face plate uses fine thread bleeder plugs be sure to compare your old plugs to the pictures. Watch the video for instruction on how to install this part and also how to determine if this is the correct part. It is about 7 3/4"" across the face, it measures about 2 1/4" from the bottom to the top width, it also measures 3" across the threads. The Suction and Pressure side thread fittings are called 2" x 2" but measure 3" from the edge of the thread to the edge of the thread. NOTE: This Face looks a lot like an Aqua-Flo and a CMP Wet End but they do not interchange!
NOTE: If you are changing you old face to a new one you may need to buy a wear ring because the original faces had the wear ring built in and the new style does not.. See the photos in the listing.. Click Here for the wear ring>Guangdong LX, Wear Ring, 48 or 56 frame, WUA, 200, 300, 400