NLA Control Retrofit Kit Balboa VS Serial 7 Button , 3 Pump ,5.5KW,115V OR 230V, Light and Cords
(No reviews yet)
Write a Review
- SKU:
- HTP58-138-2050
- Shipping:
- Calculated at Checkout
-
This is a Balboa Retrofit Complete control system that will run (3) Jet Pumps or (2) Jet Pumps and a Blower , it will also run (1) Circ Pump if equipped, and Ozonator and a Light. It comes with the pack which includes a Board, Heater and Tube and Sensors, a Serial Standard 7 Button Topside and Black Out Plate, a Light wire and bulb Kit and the Amp Cords needed to operate the items the system will run. Note:If you have a circ pump system it must move more than 30 gallon per minute to operate the M7 system. Added Note: There are a lot of circ systems that do not move more than 30GPM therefore if you have a circ system we recommend a system that uses a Pressure Switch not an M7 system.
![This is a Balboa Retrofit Complete control system that will run (3) Jet Pumps or (2) Jet Pumps and a Blower , it will also run (1) Circ Pump if equipped, and Ozonator and a Light. It comes with the pack which includes a Board, Heater and Tube and Sensors, a Serial Standard 7 Button Topside and Black Out Plate, a Light wire and bulb Kit and the Amp Cords needed to operate the items the system will run. Note:If you have a circ pump system it must move more than 30 gallon per minute to operate the M7 system. Added Note: There are a lot of circ systems that do not move more than 30GPM therefore if you have a circ system we recommend a system that uses a Pressure Switch not an M7 system.]( "This is a Balboa Retrofit Complete control system that will run (3) Jet Pumps or (2) Jet Pumps and a Blower , it will also run (1) Circ Pump if equipped, and Ozonator and a Light. It comes with the pack which includes a Board, Heater and Tube and Sensors, a Serial Standard 7 Button Topside and Black Out Plate, a Light wire and bulb Kit and the Amp Cords needed to operate the items the system will run. Note:If you have a circ pump system it must move more than 30 gallon per minute to operate the M7 system. Added Note: There are a lot of circ systems that do not move more than 30GPM therefore if you have a circ system we recommend a system that uses a Pressure Switch not an M7 system.")
-
This kit comes with a 7 button Serial Standard topside with a Black Out plate that measures 8 9/16" long x 3 1/2" wide to take up the space if you are replacing a larger topside system. This is a Balboa Retrofit Complete control system that will run (3) Jet Pumps or (2) Jet Pumps and a Blower , it will also run (1) Circ Pump if equipped, and Ozonator and a Light. It comes with the pack which includes a Board, Heater and Tube and Sensors, a Serial Standard 7 Button Topside and Black Out Plate, a Light wire and bulb Kit and the Amp Cords needed to operate the items the system will run. Note:If you have a circ pump system it must move more than 30 gallon per minute to operate the M7 system. Added Note: There are a lot of circ systems that do not move more than 30GPM therefore if you have a circ system we recommend a system that uses a Pressure Switch not an M7 system.
![This kit comes with a 7 button Serial Standard topside with a Black Out plate that measures 8 9/16" long x 3 1/2" wide to take up the space if you are replacing a larger topside system. This is a Balboa Retrofit Complete control system that will run (3) Jet Pumps or (2) Jet Pumps and a Blower , it will also run (1) Circ Pump if equipped, and Ozonator and a Light. It comes with the pack which includes a Board, Heater and Tube and Sensors, a Serial Standard 7 Button Topside and Black Out Plate, a Light wire and bulb Kit and the Amp Cords needed to operate the items the system will run. Note:If you have a circ pump system it must move more than 30 gallon per minute to operate the M7 system. Added Note: There are a lot of circ systems that do not move more than 30GPM therefore if you have a circ system we recommend a system that uses a Pressure Switch not an M7 system.]( "This kit comes with a 7 button Serial Standard topside with a Black Out plate that measures 8 9/16\" long x 3 1/2\" wide to take up the space if you are replacing a larger topside system. This is a Balboa Retrofit Complete control system that will run (3) Jet Pumps or (2) Jet Pumps and a Blower , it will also run (1) Circ Pump if equipped, and Ozonator and a Light. It comes with the pack which includes a Board, Heater and Tube and Sensors, a Serial Standard 7 Button Topside and Black Out Plate, a Light wire and bulb Kit and the Amp Cords needed to operate the items the system will run. Note:If you have a circ pump system it must move more than 30 gallon per minute to operate the M7 system. Added Note: There are a lot of circ systems that do not move more than 30GPM therefore if you have a circ system we recommend a system that uses a Pressure Switch not an M7 system.")
-
This kit comes with the proper cords to run that components that this system will operate This is a Balboa Retrofit Complete control system that will run (3) Jet Pumps or (2) Jet Pumps and a Blower , it will also run (1) Circ Pump if equipped, and Ozonator and a Light. It comes with the pack which includes a Board, Heater and Tube and Sensors, a Serial Standard 7 Button Topside and Black Out Plate, a Light wire and bulb Kit and the Amp Cords needed to operate the items the system will run. Note:If you have a circ pump system it must move more than 30 gallon per minute to operate the M7 system. Added Note: There are a lot of circ systems that do not move more than 30GPM therefore if you have a circ system we recommend a system that uses a Pressure Switch not an M7 system.
![This kit comes with the proper cords to run that components that this system will operate
This is a Balboa Retrofit Complete control system that will run (3) Jet Pumps or (2) Jet Pumps and a Blower , it will also run (1) Circ Pump if equipped, and Ozonator and a Light. It comes with the pack which includes a Board, Heater and Tube and Sensors, a Serial Standard 7 Button Topside and Black Out Plate, a Light wire and bulb Kit and the Amp Cords needed to operate the items the system will run. Note:If you have a circ pump system it must move more than 30 gallon per minute to operate the M7 system. Added Note: There are a lot of circ systems that do not move more than 30GPM therefore if you have a circ system we recommend a system that uses a Pressure Switch not an M7 system.]( "This kit comes with the proper cords to run that components that this system will operate
This is a Balboa Retrofit Complete control system that will run (3) Jet Pumps or (2) Jet Pumps and a Blower , it will also run (1) Circ Pump if equipped, and Ozonator and a Light. It comes with the pack which includes a Board, Heater and Tube and Sensors, a Serial Standard 7 Button Topside and Black Out Plate, a Light wire and bulb Kit and the Amp Cords needed to operate the items the system will run. Note:If you have a circ pump system it must move more than 30 gallon per minute to operate the M7 system. Added Note: There are a lot of circ systems that do not move more than 30GPM therefore if you have a circ system we recommend a system that uses a Pressure Switch not an M7 system.")
-
This kit comes with a Light bulb and Harness. This is a Balboa Retrofit Complete control system that will run (3) Jet Pumps or (2) Jet Pumps and a Blower , it will also run (1) Circ Pump if equipped, and Ozonator and a Light. It comes with the pack which includes a Board, Heater and Tube and Sensors, a Serial Standard 7 Button Topside and Black Out Plate, a Light wire and bulb Kit and the Amp Cords needed to operate the items the system will run. Note:If you have a circ pump system it must move more than 30 gallon per minute to operate the M7 system. Added Note: There are a lot of circ systems that do not move more than 30GPM therefore if you have a circ system we recommend a system that uses a Pressure Switch not an M7 system.
![This kit comes with a Light bulb and Harness.
This is a Balboa Retrofit Complete control system that will run (3) Jet Pumps or (2) Jet Pumps and a Blower , it will also run (1) Circ Pump if equipped, and Ozonator and a Light. It comes with the pack which includes a Board, Heater and Tube and Sensors, a Serial Standard 7 Button Topside and Black Out Plate, a Light wire and bulb Kit and the Amp Cords needed to operate the items the system will run. Note:If you have a circ pump system it must move more than 30 gallon per minute to operate the M7 system. Added Note: There are a lot of circ systems that do not move more than 30GPM therefore if you have a circ system we recommend a system that uses a Pressure Switch not an M7 system.]( "This kit comes with a Light bulb and Harness.
This is a Balboa Retrofit Complete control system that will run (3) Jet Pumps or (2) Jet Pumps and a Blower , it will also run (1) Circ Pump if equipped, and Ozonator and a Light. It comes with the pack which includes a Board, Heater and Tube and Sensors, a Serial Standard 7 Button Topside and Black Out Plate, a Light wire and bulb Kit and the Amp Cords needed to operate the items the system will run. Note:If you have a circ pump system it must move more than 30 gallon per minute to operate the M7 system. Added Note: There are a lot of circ systems that do not move more than 30GPM therefore if you have a circ system we recommend a system that uses a Pressure Switch not an M7 system.")
-
This is a Balboa Retrofit Complete control system that will run (3) Jet Pumps or (2) Jet Pumps and a Blower , it will also run (1) Circ Pump if equipped, and Ozonator and a Light. It comes with the pack which includes a Board, Heater and Tube and Sensors, a Serial Standard 7 Button Topside and Black Out Plate, a Light wire and bulb Kit and the Amp Cords needed to operate the items the system will run. Note:If you have a circ pump system it must move more than 30 gallon per minute to operate the M7 system. Added Note: There are a lot of circ systems that do not move more than 30GPM therefore if you have a circ system we recommend a system that uses a Pressure Switch not an M7 system.
![This is a Balboa Retrofit Complete control system that will run (3) Jet Pumps or (2) Jet Pumps and a Blower , it will also run (1) Circ Pump if equipped, and Ozonator and a Light. It comes with the pack which includes a Board, Heater and Tube and Sensors, a Serial Standard 7 Button Topside and Black Out Plate, a Light wire and bulb Kit and the Amp Cords needed to operate the items the system will run. Note:If you have a circ pump system it must move more than 30 gallon per minute to operate the M7 system. Added Note: There are a lot of circ systems that do not move more than 30GPM therefore if you have a circ system we recommend a system that uses a Pressure Switch not an M7 system.]( "This is a Balboa Retrofit Complete control system that will run (3) Jet Pumps or (2) Jet Pumps and a Blower , it will also run (1) Circ Pump if equipped, and Ozonator and a Light. It comes with the pack which includes a Board, Heater and Tube and Sensors, a Serial Standard 7 Button Topside and Black Out Plate, a Light wire and bulb Kit and the Amp Cords needed to operate the items the system will run. Note:If you have a circ pump system it must move more than 30 gallon per minute to operate the M7 system. Added Note: There are a lot of circ systems that do not move more than 30GPM therefore if you have a circ system we recommend a system that uses a Pressure Switch not an M7 system.")
Description
This kit is no longer available you would choose this kit: Retrofit MODPACK 202 Control Pack, (2) Pump, Blower, Circ Pump, Ozone and 5.5kW, 230v
This is a Balboa Retrofit Complete control system with a 15" long heater tube that will run (3) Jet Pumps or (2) Jet Pumps and a Blower, (1) Circ Pump if equipped, and Ozonator and a Light. It comes with the pack which includes a Board, Heater and Tube and Sensors, a 7 Button Serial Standard Topside, a Light wire and bulb Kit and the Amp Cords needed to operate the items the system will run. Note:If you have a circ pump system it must move more than 30 gallon per minute to operate the M7 system. Added Note: There are a lot of circ systems that do not move more than 30GPM therefore if you have a circ system we recommend a system that uses a Pressure Switch not an M7 system.
When you purchase a Retrofit Kit from us you will have access to call us when installing for advice that is part of your purchase.
This complete retrofit spa pack VS-510Z that can be hooked up 120/240V but this will depend on your components meaning if you have 230V pumps or blower you must wire this 230V if you have all 115V pumps and blowers you can wire 115V although you would not normally wire any system with more than one pump 115V.
Overall dimensions are 11" Tall x 15" Wide x 4-1/2" Deep
This Retrofit Kit Includes:
- 5.5kW heater with Balboa's patented M7 technology (no pressure switches)
- Spa Control System 54371-HC
- Panel Model - Serial Standard: Panel Dimensions (in) 7.35 x 3.26 (cm) 18.67 x 8.28
- Other Parts Included - Cords, Bezel, and one LED light assembly
Supports (but does not include):
- 2 speed pump (120V/240V)
- 1 speed pump (240V)
- Blower (120V/240V)
- Ozone Generator (120V/240V)
- Spa Light (12V/12W)
Features & Benefits
Replaces failure-prone mechanical pressure/flow switch
Can be plumbed to either suction or pressure side of pump
120/240V convertible power
Custom plastic enclosure
M7 flow/ temperature sensors
Rigorously tested
US & Canadian safety approvals
Optional Devices
• 120V / 240V Circ Pump*
* = Ozone and Circ Pump must be same voltage.
Related Products
Out of stock
NLA Control Retrofit Kit Balboa VS500Z, 1 Pump ,5.5kW,115v or 230v, With Light and Cords
MSRP:
$1,263.74
$582.91
This system is no longer available from the manufacturer.. Click here for a replacement system: Retrofit MODPACK Control Pack, (2) Pump, Ozone and 5.5kW, 115v or 230v
This is a Balboa Retrofit...
Out of stock
NLA CONTROL RETROFIT KIT BALBOA VS501Z Duplex 4 Button , 2 PUMP ,5.5KW,115V OR 230V, LIGHT AND CORDS
MSRP:
$961.99
$619.99
No longer available. Please see Balboas new retro-for replacement system here: Control Retrofit Kit Balboa BP7, 1 or 2 Pump/B
Control Retrofit Balboa VS501Z, 2 Pump ,5.5KW,115V OR 230V, W/ Light and Cords
MSRP:
$1,238.49
$599.99
Limited to supply on hand since Balboa no longer makes this system, see below for new replacement kit.
This system is no longer made the replacement would be this one: Control Retrofit Kit...
Out of stock
Control Retrofit Kit Balboa VS500Z Mini Oval, 1 Pump ,5.5KW,115V OR 230V, W/ Light and Cords
MSRP:
$1,179.51
$579.99
This is a Balboa Retrofit Complete control system that will run (1) Jet Pump ,(1) Circ Pump if equipped, and Ozonator and a Light. It comes with the pack which includes a Board, Heater and Tube...
Control Retrofit Kit Balboa BP7, 2 Pump, Pump 3/Blower ,Ozone ,Light, 5.5kW, 115v/230v, with TP600 Topside
MSRP:
$699.99
$605.99
The next generation feature rich Balboa BP7 control system with a 5.5KW heater bundled with the sleek rounded rectangle shaped 6 button TP600 topside control with large easy to read backlit LCD...
Control Retrofit Kit Balboa BP7, 2 Pump, Pump 3/Blower ,Ozone ,Light, 4.0kW, 115v/230v, with TP600 Topside
MSRP:
$699.99
$599.99
The next generation feature rich Balboa BP7 control system with a 4.0KW heater bundled with the sleek rectangle shaped 6 button TP600 topside control with large easy to read backlit LCD screen and...
Control Retrofit Kit Balboa BP7, 1 or 2 Pump/Blower ,Ozone ,Light, 4.0kW, 115v/230v, with TP500 Topside
MSRP:
$799.99
$579.99
The next generation feature rich Balboa BP7 control system with a 4.0KW heater bundled with the sleek rectangle shaped 6 button TP500 topside control with large easy to read backlit LCD screen and...
Retrofit ePACK Control Pack, (2) Pump, Ozone and 4.0kW, 115v or 230v
MSRP:
$749.99
$559.99
The ePACK is a universal replacement spa control system that features a water sensor instead of a pressure or flow switch so this pack will work plumbed in the pressure or suction side...
Retrofit MODPACK Control Pack, (2) Pump, Ozone and 4.0kW, 115v or 230v
MSRP:
$769.99
$589.99
The MODPACK 101 is a universal replacement spa control system. Heater assembly is 15″ long, it is mounted to the back of the enclosure. To simplify the replacement process, heater...