Manifold Hot Tub Spa 2" Street x 2" Slip x (4) 3/4" Coupler Glue Kit Video How To

(No reviews yet) Write a Review
SKU:
ASP2SXS4.75couplerflexbarbstubegluekit
Shipping:
Calculated at Checkout
  • Manifold Hot Tub Spa 2" Street x 2" Slip x (4) 3/4" Coupler Glue Kit Video How To
  • The manifold featured in this kit is Open on both ends.. One end receives a 2" Pipe or fitting that would measure 2 3/8" OD and on the other end glues inside of a 2" fitting that would measure 2 3/8" Inside Diameter..
  • This kit features 3/4" ID Tubing to extend your original plumbing..
  • This is an example of the coupler and clamps being used to connect the old tubing with new..
  • The couplers are 3/4" OD used to glue inside of 3/4" Vinyl tubing..
  • This is an example of the 3/4" Tubing on a Manifold with a clamp..
  • The Inside Diameter of the slip connection on this manifold is 2 3/8"..
  • The Outside Diameter of the 2" Flex pipe is 2 3/8"..
  • The 2" Flex Pipe is 6" Long..
  • Manifold Hot Tub Spa 2" Slip x Dead End x (4) 3/4" Coupler Kit Video How To
  • Manifold Hot Tub Spa 2" Slip x Dead End x (4) 3/4" Coupler Kit Video How To
  • The slip side of this manifold would receive a 2" Piece of pipe or a fitting that would measure 2 3/8" OD..
  • The street side of this manifold would glue into a 2" fitting that would measure 2 3/8" ID..
  • Manifold Hot Tub Spa 2" Street x 2" Slip x (4) 3/4" Coupler Kit Video How To
MSRP: $88.99
$63.99
— You save $25.00

Description

See the Informational videos here first. This kit is a 2" Street X 2" Slip X (4) 3/4" Barbs Manifold with Glue Replacement Kit. The Kit consists of the 2" Street X 2" Slip Manifold with (4) 3/4" Barbs, (1) Barb Plug to cut the manifold down to 3 barbs, (1) 2" Coupler, (1) 6" Piece of 2" Soft Pipe, (8) 3/4" Clamps and 12" of Clear 3/4" Tube so you have about 3" per extension with 4oz of Blue Glue and Purple Primer. The kit is to be used to replace a broken manifold and extend the output side tubes and use the coupler to spin it to win it on the old pipe and then glue the 6" piece of 2" Flex in and then glue the manifolds in from there. The Manifold receives a 2" pipe or fitting on one side and then slips inside of a 2" fitting on the other side.  This part used in newer hot tubs. Note: We offer many different Kits in our store with many different configurations and also with glue.  
 
 




View AllClose

Related Products