Manifold Hot Tub Spa 2" Slip x 2" Slip (6) 3/4" Coupler Kit Video How To

(No reviews yet) Write a Review
SKU:
ASP2slxslx6.75couplerflexbarbstubekit
Shipping:
Calculated at Checkout
  • Manifold Hot Tub Spa 2" Slip x 2" Slip (6) 3/4" Coupler Kit Video How To
  • The manifold featured in this kit is Open on both ends.. Each end receives a 2" Pipe or fitting that would measure 2 3/8" OD..
  • This kit features 3/4" ID Tubing to extend your original plumbing..
  • This is an example of the coupler and clamps being used to connect the old tubing with new..
  • The couplers are 3/4" OD used to glue inside of 3/4" Vinyl tubing..
  • The Inside Diameter of the slip connection on each end of this manifold is 2 3/8"..
  • The Inside Diameter of the slip connection on each end of this manifold is 2 3/8"..
  • This is an example of the 3/4" Tubing on a Manifold with a clamp..
  • Manifold Hot Tub Spa Dead End x 2" Slip (6)3/4" Coupler Kit Video How To
  • The Inside Diameter of the slip connection on this coupler is 2 3/8"..
  • Manifold Hot Tub Spa Dead End x 2" Slip (6)3/4" Coupler Kit Video How To
  • Manifold Hot Tub Spa 2" Slip x 2" Slip (6) 3/4" Coupler Kit Video How To
  • Manifold Hot Tub Spa 2" Slip x 2" Slip (6) 3/4" Coupler Kit Video How To
  • Manifold Hot Tub Spa 2" Slip x 2" Slip (6) 3/4" Coupler Kit Video How To
  • Manifold Hot Tub Spa 2" Slip x 2" Slip (6) 3/4" Coupler Kit Video How To
  • Manifold Hot Tub Spa 2" Slip x 2" Slip (6) 3/4" Coupler Kit Video How To
  • Manifold Hot Tub Spa 2" Slip x 2" Slip (6) 3/4" Coupler Kit Video How To
MSRP: $97.99
$63.99
— You save $34.00

Description

See the Informational videos here first. 
 
This Kit is a 2" Slip X 2" Slip X (6) 3/4" Barbs Manifold Replacement Kit.
 
The Kit consists of the Manifold with (6) 3/4" Barbs, (1) Barb Plug to cut the manifold down to 5 barbs, (2) 2" Couplers, (2) 6" Pieces of 2" Soft Pipe, (12) 3/4" Clamps and 18" of Clear 3/4" Tube so you have about 3" per extension.
 
The kit is to be used to replace a broken manifold and extend the output side tubes and use the coupler to spin it to win it on the old pipe and then glue the 6" piece of 2" Flex in and then glue the manifolds in from there. 
 
The Manifold receives a 2" pipe or fitting on one side and then receives a 2" pipe or fitting on the other side.  
 
Note: We offer many different Kits in our store with many different configurations and also with glue. 
 

 




 
 
View AllClose

Related Products