Jet Internal, Waterway, Poly Jet, 3-3/8" face diameter, Pulsator, Deluxe Scalloped, White
- SKU:
- HTP55-270-BL41/210-HE70
- Shipping:
- Calculated at Checkout
-
Jet Internal, Waterway, Poly Jet, 3-3/8" face diameter, Pulsator, Deluxe Scalloped, White
-
This is the basic measurements of a Waterway Poly Jet 3-3/8" face diameter... The one you see in this picture has a angled back but some have a square back as well as illustrated by the Type 11 line. also some faces are 3 3/8" up to over 4".. Most of the larger faced jets are no longer available.
-
Jet Internal, Waterway, Poly Jet, 3-3/8" face diameter, Pulsator, Deluxe Scalloped, White
-
Jet Internal, Waterway, Poly Jet, 3-3/8" face diameter, Pulsator, Deluxe Scalloped, White
-
Jet Internal, Waterway, Poly Jet, 3-3/8" face diameter, Pulsator, Deluxe Scalloped, White
Description
This part is a Complete Jet Internal, Waterway, Poly Jet, 3-3/8" face diameter, Pulsator, Deluxe Scalloped, White...
Note: We have plenty of New Old Stock of these so they will have sight imperfections..
This jet is threaded and the way you remove it is use a flat screw driver and carefully start pulling the edge of the face out on each side a little at the time until it pulls completely out to a stop point and then you unscrew the jet from the body turning left.. To install you pull the face out to the furthermost point and hold the center of the jet with your forefinger while holding the outside edge of the jet face with your other finger and screw the jet fully into the jet body then with the palm of your hand bump the jet face in on each side until it is fully inane even with the shell wall..
Installation Type | Thread In |
Face Diameter | 3-3/8" |
Jet Part Type | Internal |
Diffuser Opening Type | 9 |
Base Diameter | 2-1/8" |
Total Length | 3-11/16" - 4-7/16" |
Manufacturer | Waterway |
Model | Poly Jet, Gunite, Poly Jet |
Color | White |
Internal Type | Twin Roto |
Face Style | Deluxe Scalloped |
Special Feature | Adjustable On/Off Control |