Intertek LX Pump Face 2" WUA 48 & 56 Frame Replacement Face Fine Bleeder Threads

(No reviews yet) Write a Review
SKU:
HTPLXTSandardface
Shipping:
Calculated at Checkout
  • Intertek LX Pump Face 2" WUA 48 & 56 Frame Replacement Face Fine Bleeder Threads Note: This face does not come with the bleeder plugs or the outside O-ring... See below in the description for the other parts..
  • Note: If your original face looks like the left face in the back with the wear ring built in you will need to purchase a wear ring because the replacements faces do have the wear ring built in.. The link is in the the description area..
  • NOTE: If your original Plug looks like this then this is NOT the correct Face plate and you will need to purchase a complete wet end..
  • If your original Plug looks like this one this face is correct..
  • Compare your wet end to this picture to be sure that this is the correct wet end before choosing this face.
  • This is the way the new face, Wear ring and impeller fit together.. For illustration only the impeller and wear ring are not included in this listing..
  • Compare your screws to be sure that this is the correct wet end brand before you choose this face.
  • This Face fits a pump that looks like this...
  • Compare your motor shaft to these to be sure you are working on the correct wet end before ordering this face..
  • Intertek LX Pump Face 2" WUA 48 & 56 Frame Replacement Face Fine Bleeder Threads Note: This face does not come with the bleeder plugs or the outside O-ring... See below in the description for the other parts..
  • Intertek LX Pump Face 2" WUA 48 & 56 Frame Replacement Face Fine Bleeder Threads Note: This face does not come with the bleeder plugs or the outside O-ring... See below in the description for the other parts..
  • Intertek LX Pump Face 2" WUA 48 & 56 Frame Replacement Face Fine Bleeder Threads Note: This face does not come with the bleeder plugs or the outside O-ring... See below in the description for the other parts..
  • Intertek LX Pump Face 2" WUA 48 & 56 Frame Replacement Face Fine Bleeder Threads Note: This face does not come with the bleeder plugs or the outside O-ring... See below in the description for the other parts..
  • Intertek LX Pump Face 2" WUA 48 & 56 Frame Replacement Face Fine Bleeder Threads Note: This face does not come with the bleeder plugs or the outside O-ring... See below in the description for the other parts..
  • Intertek LX Pump Face 2" WUA 48 & 56 Frame Replacement Face Fine Bleeder Threads Note: This face does not come with the bleeder plugs or the outside O-ring... See below in the description for the other parts..
MSRP: $37.99
$32.99
— You save $5.00

Description

This part is Obsolete but we occasionally have some takes offs from new wet ends that have been damaged.. The face will not be damaged they just come off of wet ends that have had shipping damage. If you do not see any here for sale meaning you cannot put one in your cart then the only other choice is a complete wet end.. 

This Part is a 48 or 56 Frame Face Plate for an Intertek LX Brand Pump Wet End only this face plate uses fine thread bleeder plugs be sure to compare your old plugs to the pictures. Watch the video for instruction on how to install this part and also how to determine if this is the correct part. It is about 7 3/4"" across the face, it measures about 2 1/4" from the bottom to the top width, it also measures 3" across the threads. The Suction and Pressure side thread fittings are called 2" x 2" but measure 3" from the edge of the thread to the edge of the thread.                                                                                                               NOTE: This Face looks a lot like an Aqua-Flo and a CMP Wet End but they do not interchange! 

 

NOTE: If you are changing you old face to a new one you may need to buy a wear ring because the original faces had the wear ring built in and the new style does not.. See the photos in the listing.. Click Here for the wear ring>Guangdong LX, Wear Ring, 48 or 56 frame, WUA, 200, 300, 400

 

Note: This Face Fits Guangdong Chinese LX and LP series Pumps only Some Pump Part numbers are as follows: (WUA400-II, WUA400-I)  (LP400) (WP400-II/,400-I), (WUA350-II, WUA350-I)  (LP350) (WP350-II/,350-I), (WUA300-II, WUA300-I)  (LP300) (WP300-II/,300-I), (WUA200-II, WUA200-I)  (LP200) (WP200-II/,200-I)
NOTE: This Part will Fit Sundance® or Jacuzzi® Tubs with a Guangdong LX Wet End if you replace the entire Wet End for internal parts of the wet end you already have click here Jacuzzi® & Sundance® LX Parts
 
To Install this face plate you will have to loosen the (8) Face bolts and pry the face off transfer your old bleeder plugs and outside o-ring and reinstall the face tightening the screws... Note: We offer parts for this wet end and complete pumps in our store. Choose with care, I Do Not accept returns so be sure these are correct before ordering! 
 
1000, VG-1000, USSPS1000B, 5250-106, AS-1000, 071734S, PS-1000,319-3100B,waterway, executive, hiflo, hi-flo, wet end, wet end, spa wet end seal , hot tub wet end seal, 1000 seal, p-1000 seal, ps-1000 seal, p 1000 seal, ps 1000 seal
Visit our Store as we also offer these and other associated products and accessories for your Spa.
Please note: When you have a seal leaking in most cases you will need an impeller because the leak caused water to get into the metal shaft area that the impeller is screwed onto and expands and damages the impellor. We offer the impellers along with the seal in a kit in our store. Watch the video above for how to install the seal and other repairs for this pump as well.
WUA200-II,WUA300-II,WUA400-II,WUA200-I,WUA300-I,WUA400-I,LP200,LP250,LP300,LP150,WP200-II,WP250-II,WP300-II,WP200-I,wp250-I,wp300-I,wp400-I
WUA200,WUA300,WUA400,WUA200,WUA300,WUA400,LP200,LP250,LP300,LP150,WP200,WP250,WP300,WP200,wp250,wp300,wp400,chinese,lx,guangdong,energy saver spa equipment
 
View AllClose

Related Products