Impeller, Waterway, Viper, 5.0hp, Pump 2 1/2" x 2 1/2" Wet End

(No reviews yet) Write a Review
SKU:
HTP35-270-1742
Shipping:
Calculated at Checkout
  • Impeller, Waterway, Viper, 5.0hp, Pump 2 1/2" x 2 1/2" Wet End
  • This is an example of what the wet end looks like that this impeller fits..
  • Impeller, Waterway, Viper, 5.0hp, Pump 2 1/2" x 2 1/2" Wet End
  • Impeller, Waterway, Viper, 5.0hp, Pump 2 1/2" x 2 1/2" Wet End
  • The original Impeller looked like this the new one looks like the one above..
  • Impeller, Waterway, Viper, 5.0hp, Pump 2 1/2" x 2 1/2" Wet End
  • Impeller, Waterway, Viper, 5.0hp, Pump 2 1/2" x 2 1/2" Wet End
  • Impeller, Waterway, Viper, 5.0hp, Pump 2 1/2" x 2 1/2" Wet End
  • Impeller, Waterway, Viper, 5.0hp, Pump 2 1/2" x 2 1/2" Wet End
MSRP: $59.99
$41.99
— You save $18.00

Description

Waterway Viper Pump 5.0 Impeller exclusively for a Waterway Viper pump which has 2 1/2" inlet and outlet which measures about 3 9/16" across the threads...I have found this 5HP pump impeller to be on a 14-16 amp motor...

 

Closed face impeller made for the Viper pump by Waterway Plastics. Rated at 5.0hp, it is used in a Waterway Viper pump wet end, and must be installed on a 5.0hp (or greater) thru bolt motor.


Impeller Type    Closed Face
Impeller Diameter OD    3-11/16"
Vane Width ID    11/16"
Eye Diameter OD    2-5/8"
Eye Length    9/16"
Impeller Width OD    29/32"
Seal Seat Depth    7/32"
Shaft Length    1-1/2"
Shaft Diameter OD    5/8"
Seal Seat Diameter OD    1-1/4"
Manufacturer    Waterway
Pump Application    Viper




View AllClose