Impeller, Sta-Rite, DuraJet DJ, 1.0-1.5hp, 8.0-9.0 Amp at 230V or 16.0 Amps at 115V

(No reviews yet) Write a Review
SKU:
HTP35-102-1446
Shipping:
Calculated at Checkout
  • Impeller, Sta-Rite, DuraJet DJ, 1.0-1.5hp, 8.0-9.0 Amp at 230V or 16.0 Amps at 115V
  • Impeller, Sta-Rite, DuraJet DJ, 1.0-1.5hp, 8.0-9.0 Amp at 230V or 16.0 Amps at 115V
  • Impeller, Sta-Rite, DuraJet DJ, 1.0-1.5hp, 8.0-9.0 Amp at 230V or 16.0 Amps at 115V
  • Impeller, Sta-Rite, DuraJet DJ, 1.0-1.5hp, 8.0-9.0 Amp at 230V or 16.0 Amps at 115V
  • Impeller, Sta-Rite, DuraJet DJ, 1.0-1.5hp, 8.0-9.0 Amp at 230V or 16.0 Amps at 115V
  • Impeller, Sta-Rite, DuraJet DJ, 1.0-1.5hp, 8.0-9.0 Amp at 230V or 16.0 Amps at 115V
MSRP: $44.99
$34.99
— You save $10.00

Description

This part is an Impeller for a Sta-Rite DuraJet DJ Wet End that would be called 1.0hp-1.5HP, your motor should be 8.0-9.0Amp at 230V or 16.0 Amps at 115V.. The number on the back of the impeller will be 17400-0021 or 17400-0121 if you have a number on yours..

For seal kits that fit this pump click this link: 201 Seal Kits

For a face o-ring for this Wet End Click this link: Wet End O-Ring 5-1/8" ID, 3/16" Cross Section Sta-Rite Starite Dura-Jet DJ Series


Impeller Type    Closed Face
Impeller Diameter OD    3-3/4"
Vane Width ID    5/16"
Eye Diameter OD    1-3/4"
Eye Length    5/8"
Impeller Width OD    1/2"
Seal Seat Depth    n/a
Shaft Length    1-13/16"
Shaft Diameter OD    3/4"
Seal Seat Diameter OD    n/a
Manufacturer    Sta-Rite
Pump Application    Dura-Jet

View AllClose