Impeller, Power-Right, 9089X/504, 2.5ohp/5spl NLA

This Impeller is obsolete but there is an Impeller that will work but there is only one choice and it will look different than your old impeller: Impeller, Vico Ultima Ultra Jet Flo,4.0hp,Black/Green/Red

Power-Right Pump Impeller has PR-400-5 stamped in the back and PR565 on the front..

Closed face impeller made for the PRC9089X and PRC504 Pump by Power-Right. Rated at 2.5hp, the 9089X and 504 impellers must be installed on a 2.5hp (or greater) motor.

Seals and kits for this impeller can be found here: 201 Seals

Impeller Type    Closed Face
Impeller Diameter OD    3-13/16"
Vane Width ID    7/8"
Eye Diameter OD    2-1/4"
Eye Length    5/16"
Impeller Width OD    1-1/8"
Seal Seat Depth    1/16"
Shaft Length    1-1/16"
Shaft Diameter OD    3/4"
Seal Seat Diameter OD    1-9/16"
Manufacturer    Power Right
Pump Application    9089X