HotSpring, Watkins, Caldera, Tiger River Spa Parts

This part is a Pump Bleeder Barb for some Watkins Wavemaster LX Pumps and others.. It is 1/2" Barb x 1/4"Mpt and is used with an unusually large bleeder line.. The line is 1/2" Inside Diameter not 3/8" Inside Diameter like most bleeder lines.. This...

Universal Rite-Fit Gecko Series heater assembly, 2.25”x 15”, 304SS, multiple PSI taps, adjustable cover plate, and adjustable studs. Includes 2”x2” tail pieces 2” ridged gaskets.   This heater will...

This part is an Air Check Valve Kit with a 1" Air Check Valve a (4) 3/8" Barb Transistion Manifold with (2) Plugs that can be down to (2) Barbs and a 4oz can of glue to glue it all together. This valve is used above the water line to allow constant...

This part is an Air Check Valve with a 1" Slip Fittings on one end. This valve is used above the water line to allow constant air flow in one direct and to stop water flow in the other direction when plumbed properly in a Hot Tub. This type Check...

This Item is a 1.0 Horse Power 9.0 Amp (1) Speed 48 Frame Complete 1 1/2" Side Discharge Pump. These pumps usually have the part number WBC150 on the label for an Intertek Pump.  Manufacturer Lingxiao-Pump Pump Model WBC Speed 1...

This Item is a 1.0 Horse Power 9.0 Amp (1) Speed 48 Frame Complete 1 1/2" Side Discharge Pump found in some Hot Tubs. It may have a Vendor Code 3536 LX Brand Pump. These pumps usually have the part number 1431501-03 on the label for a 3536 Version...

This 1431701-03 Vendor Code 3536 48Fr  LX Pump 2" X 2" 1.5HP 2 Speed 115V Complete Pump and motor.. This pump is a replacement for the orginal 1431701-03 pump found on some 3536 Code hottubs.. NOTE about Watkins Wavemaster Complete Pumps:...

Retro-fit for Watkins tubs such as Hot Springs and Caldera that utilize the small low flow circulation pump and the No Fault 1500 and No Fault 4000 heaters only. The Control System is designed to work with the Original No Fault Heater in your Hotspring...

This motor (Only) is a replacement for some Aqua-Flo, 39577 Code 06290, 115V or 230V, (1) Speed, 20.0Amp or 10.0Amp, 48 frame pump..  Keep in mind if you choose this high amperage pump and have a tub with a wall style 115V plug this pump may draw...

Watkins Vendor Code 4081 6.1" or 6.3"and XP2e WaveMaster Pump Face O-Ring fits around the Face of a 4081 Pump Face exclusively for An Wavemaster Xp2 pump which has 2" inlet and outlet which measures about 3" across the threads... There are (2) Different...

This heater is a flow through type heater. The heater is powered and controlled by the control box. Stainless steel tube with pressure taps. Additional Information Heater Type - Flow-Thru Heater Style - Flow-Thru Wattage - 4.0kW, Voltage -...

This is an Aqua-Flo 39577 2.0HP Seal Kit & Impeller with a 2 1/8" Eye Width... This Impeller fits between the Face and the Volute of a XP2 Wet End found on some pumps with Vendor Code 4081. Impeller Type   Closed Face Impeller Diameter...