HotSpring, Watkins, Caldera, Tiger River Spa Parts

This Kit features 3/8" x 3/'8" Barbed Coupler with a rotoclamp and Worm Clamp along with 24" of 3/8" ID vinyl tubing.  For this kit with Glue Click this Link: Moto-Massage Leak Repair Kit with Glue Watch this video for how to install..

This parts kit is a U-Bend 2" Slip X 2" Slip X 3/8" Barb PVC Plumbing Fitting with 4" of CEalr 3/8" Tubong, (2) 3/8" Tubing Clamps, (1) 3/8" barb x 3/8" Barb coupler and (1) 3/8" Barb x 1/4" Barb coupler. The U-Bend receives a 2" fitting on each side...

This part is a Complete Wet End for Vendor Code 3536 with pump numbers 39578-03, 0982601-03 or 37066-03. This is a LX Brand Replacement Wet End Pump with a  2" X 2" 2.5HP 230V Vendor Code 3536 only.   It is about 7 1/4"" across the face of the...

This part is a VSR Jet Body Assembly 3/8" Barb X 3/4" Slip 3 1/2" Hole Size.  The Jet Body is for old style VSR style jets only. If you have the new style jet to install you will still have to glue in the retrofit ring..  This is a 3/4" Slip...

This Complete Wet End fits a 39577-03 Vendor Code 3536 10 Amp 56 Frame Pump 77712.. It is about 7 1/4"" across the face of the pump, it measures about 7 3/8" from the bottom to the top of the pressure side of the volute, it also measures 4 13/16"...

This part is a  New Style Sensor, Hi-Limit (Kit) Watkins, Hot Spot/Solana, Bulb Style w/2 Pin JST Plug, Hold Down Clamp & Insulation.. HIGH LIMIT USED ON 2006+ MODEL HOT SPOT AND SOLANA MODEL SPAS. SENSOR DESIGN HAS CHANGE AND NOW KIT COMES WITH...

This Item is a Wear Ring, fits LX 1431501-03 Wet End Only. It may have a Vendor Code 3536 on the LX Brand Pump. These pumps usually have the part number 1431501-03 on the label for the 3536 Version. NOTE: Do Not purchase this for any other brand except...

This Item is a seal for the LX Hot Tub pump with the part number 1431501-03. It may have a Vendor Code 3536 on the LX Brand Pump. These pumps usually have the part number 1431501-03 on the label for a 3536 Version. NOTE: Do Not purchase this for any...

This complete pump and motor is a replacement for 36675-03.. This pump is a 115V or 230V, (1) Speed, 17.0Amp or 8.5Amp, 48 frame 2" x 2" XP2 pump and motor... The 2" inlet and outlet measure about 3" across the threads... Keep in mind if you choose this...

This Kit is a Set of 2 NON-Standard 2" Heater or Pump Union O-Ring that measures 2 5/8" Center to Center. The O-Ring is 2 5/8" center to center and fits some unions but most unions are 2 1/2" center to center... Do not buy this O-Ring...

This part is a Stronger Pump Bleeder Barb that fits some Watkins Wavemaster XP2, XP2E, LX and others.. It is 1/4" Barb x 1/4"Npt and is used with an unusual bleeder line.. The line is 1/4" Inside Diameter not 3/8" Inside Diameter like most bleeder lines....

This 90 Tee Kit is exclusively for HotSpring Hot Tubs made by Watkins and can be found under the name Hotspring, Solana, Tiger River, Caldera... This is not a Watkins Brand Part.. This Item is the 90 Ell found on the pressure side of a Laing pump...