HotSpring, Watkins, Caldera, Tiger River Spa Parts

This Kit is a Set of 2 NON-Standard 2" Heater or Pump Union O-Ring that measures 2 5/8" Center to Center. The O-Ring is 2 5/8" center to center and fits some unions but most unions are 2 1/2" center to center... Do not buy this O-Ring...

This part is a Stronger Pump Bleeder Barb that fits some Watkins Wavemaster XP2, XP2E, LX and others.. It is 1/4" Barb x 1/4"Npt and is used with an unusual bleeder line.. The line is 1/4" Inside Diameter not 3/8" Inside Diameter like most bleeder lines....

This 90 Tee Kit is exclusively for HotSpring Hot Tubs made by Watkins and can be found under the name Hotspring, Solana, Tiger River, Caldera... This is not a Watkins Brand Part.. This Item is the 90 Ell found on the pressure side of a Laing pump...

This part is a Pump Bleeder Barb for some Watkins Wavemaster LX Pumps and others.. It is 1/2" Barb x 1/4"Mpt and is used with an unusually large bleeder line.. The line is 1/2" Inside Diameter not 3/8" Inside Diameter like most bleeder lines.. This...

This part is an Air Check Valve Kit with a 1" Air Check Valve a (4) 3/8" Barb Transistion Manifold with (2) Plugs that can be down to (2) Barbs and a 4oz can of glue to glue it all together. This valve is used above the water line to allow constant...

This part is an Air Check Valve with a 1" Slip Fittings on one end. This valve is used above the water line to allow constant air flow in one direct and to stop water flow in the other direction when plumbed properly in a Hot Tub. This type Check...

Watkins Vendor Code 4081 6.1" or 6.3"and XP2e WaveMaster Pump Face O-Ring fits around the Face of a 4081 Pump Face exclusively for An Wavemaster Xp2 pump which has 2" inlet and outlet which measures about 3" across the threads... There are (2) Different...

This is an Aqua-Flo 39577 2.0HP Seal Kit & Impeller with a 2 1/8" Eye Width... This Impeller fits between the Face and the Volute of a XP2 Wet End found on some pumps with Vendor Code 4081. Impeller Type   Closed Face Impeller Diameter...

This LX 1019801-03 or 39577-03 Vendor Code 3536 2HP Impeller that fits 56 Frame Pump Wet Ends manufactured by Intertek LX Brand only. It is about 4 1/8"" across the face edge to edge, it measures about 3" from the tip of the front to the tip of the...

This kit is features a 1 Amp Pressure Switch and (2) Blue Spade connectors that can be used in place of the Tradional Square Pressure Switch found on some Hotspring Tubs by Watkins.. This Switch features 1/8th" MPT Standard Threads and 2 Spade...

This part is a Watkins Diverter Bezel Cover White 33833 for some 1993-2003 Hot Spring tubs.. 

This Kit features 3/8" x 3/'8" Barbed Coupler with a rotoclamp and Worm Clamp along with 24" of 3/8" ID vinyl tubing and (1) 4oz Blue Glue..  For this kit without the Glue Click this Link:Moto-Massage Repair Kit No Glue Watch this video for how to...