Dynasty Hot Tub Parts

This Item is a Wet End for a 1.0 Horse Power 9.0 Amp (1) Speed 48 Frame Complete 1 1/2" Side Discharge Pump. It may have a Vendor Code 3536 LX Brand Pump. These pumps usually have the part number 1431501-03 on the label for a 3536 Version.  NOTE:...

This part is a Wet End for Circulation Pump, LX 48WTC, 1/8HP, 115 or 230V, 1.6 or 0.8A, 1-1/2"MBT, Side Discharge.. This pump is a 48 frame Side Discharge wet end with a 1 1/2" suction side and 1 1/2" pressure side which measures about 2 3/8" edge to...

Waterway Master Massage Massage Jet Assembly 7 1/2" 224-9551S Features: Extra large 7 ½" construction Available with adjustable flow control Easy through-wall installation ¾" nozzle = 75 GPM flow Two ball bearings for added jet life 1...

This part is a Pillow - 21" Corner Wrap Graphite - no pegs Fits Pinnacle Plus Spa Models : LX 11000, LX 9000, LX 8000, LX 5000, LX 4000 Also used on Gulf Coast Spas, Hydro Spa, Vita Spas, Dynasty Spas Same as part #823089 Mfg. #25709-507 If your pillow...

This Kit is a 45° 2" Pump Union To Plumbing Glue Connect Kit found in many Dynasty Brand Hot Tubs. The Pump Union which measures about 3" Inside the threads glues into a 2" Slip X Slip 45° fitting on one side and then a 2" Slice Valve Glues...

You are buying a Dynasty Hot Tub Pillow for Some 2009 Dynasty Spa Hot Tubs. It is 12 1/4" long 5 3/4" Wide it has 2 tabs on the back that are 6 3/4" Apart center to center and the back is flat.  If you are not...

This part is a 4.0KW Titanium (Best) Heater Element.  This Heater Element features the bend in the back of the element needed to fit the Balboa M-7 heater tubes. This also fits Gecko, ACC, Spa Guts, Spa Builders Len Gordon, Brett Aqualine,...

This Part is a 5.5KW Titanium Heater Element with (2) Heater Union Gaskets and a 1/2Oz Tube of Special Hot Tub Formulated Silicon Sealer to Seal the Threads. This Heater Element features the bend in the back of the element needed to fit the Balboa...

This part is a 4.0KW Titanium Heater Element with (2) Gaskets and a 1/2Oz Tube of Special Hot Tub Formulated Silicon Sealer to Seal the Threads. This Heater Element features the bend in the back of the element needed to fit the Balboa M-7...

You are buying a Set of (2) 2" Heater Split Nut with 2" Slip X 2" Thread Heater Union Kit which includes (2) Split Nuts , (4) Screws, (2) 2" Slip X 2" Threaded Unions and gaskets for use with a 2" Heater Union as well as (2) 2" Slip x 2" Street...

This part is a 5.5KW Titanium (Best) Heater Element.  This Heater Element features the bend in the back of the element needed to fit the Balboa M-7 heater tubes. This also fits Gecko, ACC, Spa Guts, Spa Builders Len Gordon, Brett...