Cal Spa Hot Tub Parts

This part is an Air Check Valve Kit with a 1" Air Check Valve a (4) 3/8" Barb Transistion Manifold with (2) Plugs that can be down to (2) Barbs and a 4oz can of glue to glue it all together. This valve is used above the water line to allow constant...

This part is an Air Check Valve with a 1" Slip Fittings on one end. This valve is used above the water line to allow constant air flow in one direct and to stop water flow in the other direction when plumbed properly in a Hot Tub. This type Check...

This part is a Cal Spa Gray 3" Storm Jet Insert Pentair Cyclone Micro.. You remove this jet but twisting the face hard left.. It will push itself out..

This part is a Cal Spa Gray 3 1/2" Jet Insert Maxi Flow Reg Face - 2001 American Products.. You remove this jet but taking a small flat screw driver and sliding the tab found inside the face around the edge out and grabbing the face and sliding the...

This Kit is a 2" Pump Union, Slice Valve, Spin Kit To Plumbing Connect Kit with Glue found in many Hot Tubs. The Pump Union which measures about 3" Inside the threads receives a 2"street X 2" Slip Slice Valve then you glue the 2" coupler to spin it to...

This Kit is a 2" Pump Union, Slice Valve, Spin Kit To Plumbing Connect Kit found in many Hot Tubs. The Pump Union which measures about 3" Inside the threads receives a 2"street X 2" Slip Slice Valve then you glue the 2" coupler to spin it to win it on...

This part is a Cal Spa Cluster Storm, Jet Internal, Waterway, 2" face diameter, Textured 3 Swirl.. Note: This is a 2” Waterway Cluster Storm Jet.. Also these jets look very similar to CMP Typhoon 200 Series jets but they do not interchange so look...

This part is a Cal Spa Cluster Storm, Jet Internal, Waterway, 2" face diameter, Textured 3 Scallop.. Note: This is a 2” Waterway Cluster Storm Jet.. Also these jets look very similar to CMP Typhoon 200 Series jets but they do not interchange so...

This part is a Diverter Kit with a Stem, Silver "S" Style 4 5/16" Long Diverter Handle, Graphite 3 11/16" Graphite Cap & O-ring Kit. This Diverter Knob has a S Shaped Top and mounts on top of the Diverter Valve Stem Square that is...

This part is a Reinforced "S" Style 4 5/16" Gray Spa Diverter Handle Knob only. This Diverter Knob has a S Shaped Top and mounts on top of the Diverter Valve Stem Square that is about 7/16" Wide sticking through the diverter cap. The...

This part is a Silver "S" Style 4 5/16" Long Diverter Handle and Graphite 3 11/16" Graphite Cap & O-ring Kit only. This Diverter Knob has a S Shaped Top and mounts on top of the Diverter Valve Stem Square that is about 7/16" Wide...

This part is a Silver "S" Style 4 5/16" Long Diverter Handle and Graphite 3 11/16" Graphite Cap only. This Diverter Knob has a S Shaped Top and mounts on top of the Diverter Valve Stem Square that is about 7/16" Wide sticking through the...