Hot Tub Parts by Tub Brand

This part is a VSR Jet Body Assembly 3/8" Barb X 3/4" Slip 3 1/2" Hole Size.  The Jet Body is for old style VSR style jets only. If you have the new style jet to install you will still have to glue in the retrofit ring..  This is a 3/4" Slip...

This Complete Wet End fits a 39577-03 Vendor Code 3536 10 Amp 56 Frame Pump 77712.. It is about 7 1/4"" across the face of the pump, it measures about 7 3/8" from the bottom to the top of the pressure side of the volute, it also measures 4 13/16"...

This part is a Filter for Rainbow Pentair Predator-II-Mini (172212x) 25sqft 13-5/16" Tall X 4-15/16" Wide (2) 2 1/8" Holes..

This Black Flat Pillow will perfectly match the rest of your hot tub so you can get back to enjoying your spa. Measurements- Length: 9 1/2 inches x Width: 4 3/8 inches x Depth: 1 1/8 inches (2.54 cm) x Pin Width: 6 1/4 inches Note: There is a similar...

This part is a  New Style Sensor, Hi-Limit (Kit) Watkins, Hot Spot/Solana, Bulb Style w/2 Pin JST Plug, Hold Down Clamp & Insulation.. HIGH LIMIT USED ON 2006+ MODEL HOT SPOT AND SOLANA MODEL SPAS. SENSOR DESIGN HAS CHANGE AND NOW KIT COMES WITH...

This Item is a Wear Ring, fits LX 1431501-03 Wet End Only. It may have a Vendor Code 3536 on the LX Brand Pump. These pumps usually have the part number 1431501-03 on the label for the 3536 Version. NOTE: Do Not purchase this for any other brand except...

This Item is a seal for the LX Hot Tub pump with the part number 1431501-03. It may have a Vendor Code 3536 on the LX Brand Pump. These pumps usually have the part number 1431501-03 on the label for a 3536 Version. NOTE: Do Not purchase this for any...

This part is a Jacuzzi or Sundance Spa 4 1/4" Complete Light Assembly Kit. Lense, Green Cover, Blue Cover, Bulb Holder, Gasket and Nut..  The face size is 4 1/4" Some websites say 4 1/2" but ti is not. The hole size is 3 1/8". This fits only...

This part is a Jacuzzi or Sundance Spa 4 1/4" Light Assembly Kit , Lens, Gasket and Nut..  The face size is 4 1/4" Some websites say 4 1/2" but ti is not. The hole size is 3 1/8". This fits only Jacuzzi and Sundance Hot Tubs that fit these...

This Item is a Wet End for a 1.0 Horse Power 9.0 Amp (1) Speed 48 Frame Complete 1 1/2" Side Discharge Pump. It may have a Vendor Code 3536 LX Brand Pump. These pumps usually have the part number 1431501-03 on the label for a 3536 Version.  NOTE:...

This part is a Wet End for Circulation Pump, LX 48WTC, 1/8HP, 115 or 230V, 1.6 or 0.8A, 1-1/2"MBT, Side Discharge.. This pump is a 48 frame Side Discharge wet end with a 1 1/2" suction side and 1 1/2" pressure side which measures about 2 3/8" edge to...

This part is a D-Tec 2 (1) Amp 2PSI Pressure Switch that features 1/8th" MPT Standard Threads and 2 Spade connectors for attaching the 2 wire connections and is Ideal for applications where a larger switch will not fit. This Switch is a...