Hot Tub Parts by Tub Brand

This part is a Halo Style Water Control Valve normally used for a Waterfall or Neck Jet Control, it is a full On/Off Valve made by Waterway, the plumbing connects are 3/4" Barb x 3/4" Barb Single Port.. To connect the valve to 3/4" plumbing simply glue...

This part is a Balboa Heater M7 Sensor with a 82" wire found in some HydroQuip Systems using Balboa Boards.  Sensor Application    Spa ControlSensor Type    Hi Limit, Temp or Hi Limit,...

This part is a Balboa Heater M7 Sensor with a 46" wire found in some HydroQuip Systems using Balboa Boards.  Sensor Application    Spa ControlSensor Type    Hi Limit, Temp or Hi Limit,...

This LX 1019801-03 or 39577-03 Vendor Code 3536 2HP Impeller that fits 56 Frame Pump Wet Ends manufactured by Intertek LX Brand only. It is about 4 1/8"" across the face edge to edge, it measures about 3" from the tip of the front to the tip of the...

This part is a Complete 4.5HP Vico Ultima Brand 48frame 2 Speed Pump. Although this pump is called a 4.5HP it is really not even close it is a 9.0/2.8A 2 Speed 48 Frames which at 230V ia really 1.5hp.. 

This 1016029 3.0HP Horse Power 6.0 Amp (1) Speed 56 Frame Complete Pump is a Master Spa Pump.. This is a Direct Replacement Master Spa Part Note: Master Spa has replaced this obsolete pump with a compatible pump and that new style is what you will...

This Pump is a Replacement for a 0974101-03 or 0974001-03 1.5 HP 230V 8.0/2.6 Amp (2) Speed 48 Frame Complete Pump  It is about 7 1/4"" across the face of the pump, it measures about 7 3/8" from the bottom to the top of the pressure side of the...

This 1.5 Horse Power 230V 8.0/2.6 Amp (2) Speed 48 Frame Complete Pump is a Lingxiao LX Brand Pump. These pumps usually have the part number 48WUA1502C-II on the label for a Watkins Version. Watch the video for instruction on how to...

This jet is no longer available but there is a replacement for it without Cal Spa on it.. Click this link: https://hottubpartsofamerica...

This part is a Cal Spa Gray 3 1/2" Jet Insert Maxi Flow Reg Face - 2001 American Products.. You remove this jet but taking a small flat screw driver and sliding the tab found inside the face around the edge out and grabbing the face and sliding the...

This kit is features a 1 Amp Pressure Switch and (2) Blue Spade connectors that can be used in place of the Tradional Square Pressure Switch found on some Hotspring Tubs by Watkins.. This Switch features 1/8th" MPT Standard Threads and 2 Spade...

This part is a 3 1/2" Long X 1 9/16" Wide Jacuzzi® Premium Spa Waterfall Control Handle part that fits 2006+ J-400 Series Spas it is Silver in color. This Diverter handle Slides on the Waterfall Valve Stem that measures about 7/16" and...