Heater Elements

This part is a Heater Complete with the Sensor set and built in pressure switch an exact generic replacement for the original Watkins No Fault 4000 76228 heater... This is a generic replacement for the various versions of Watkins/Hot Spring/Tiger...

Female quick disconnect for Balboa plug and click heaters. This 6" adapter connects to the heater terminals on your circuit board and then plugs into the male 25263 adapter from your heater on the new Balboa VS, GS and EL circuit boards. Also makes a...

Male quick disconnect for Balboa plug and click heaters. This 16" adapter will connect to your heater element terminals and will either plug directly into the circuit board on BP systems or into the 25696 female adapter on the new Balboa VS, GS and EL...

Low Flow heater element in 4.0 KW for use with the Applied Computer Controls (ACC) ePack systems with the low flow circ pump option. This durable element is made specifically for the low flow environment and can handle higher temps without failure...

This Kit is a 2" Heater Union, Slice Valve, Spin Kit with Glue To Plumbing Connect Kit found in many Hot Tubs. The Heater Union which measures about 3" outside the threads receives a 2"street X 2" Slip Slice Valve then you glue the 2" coupler to spin it...

This Kit is a 2" Heater Union, Slice Valve, Spin Kit To Plumbing Connect Kit found in many Hot Tubs. The Heater Union which measures about 3" outside the threads receives a 2"street X 2" Slip Slice Valve then you glue the 2" coupler to spin it to win it...

This part is a Single of Jumper Wire that would go from a standard heater element Electrode Tab to the board Relay Spade Connector.. Loop for the heater side to female spade.. These can be used on 4.0kw to 5.5kw elements.. Circuit Board...

This part is a Set of Jumper Wires that would go from a standard heater element Electrode Tab to the board Relay Spade Connector.. Loop for the heater side to female spade.. These can be used on 4.0kw to 5.5kw elements.. Circuit Board...

This is a 1-1/4"npt Plug Element that is 9 3/4" long and it threads into a fitting in the plumbing.. With 10-32 thd studs, dual 5/16" thermowells, predrilled holes for mounting junction box 1-1/4" threaded elements measure 1-1/2" outside diameter.....

This part is a Jumper Strap Set of (2) Kit to connect the heater to the circuit board on Balboa B2DG and B240 Systems.   Circuit Board Application    Balboa Water GroupCircuit Board Model    B2DG, B240Circuit Board...

These have been being obsolete but they are back in production and we are expecting some in the May of 2019.. If you go ahead and order yours will be shipped as soon as they come in.. Watkins Replacement Element Old Style for HotSpring come with...

This part is a Set of 4" Jumper Wires that would go from a standard heater element Electrode Tab to the board bolts.. These can be used on 4.0kw to 5.5kw elements to transfer voltage from the circuit board to your heater. Uses a 10 gauge wire...