Heater, Flo Thru, Balboa M7, 15" x 2", 230v or 115v , 4.0kW, with Sensors
(No reviews yet)
Write a Review
- SKU:
- HTP46-138-1015
- Shipping:
- Calculated at Checkout
Description
Balboa Water Group
Stainless steel replacement heater assembly, 4.0kW, 230v or 115v, the inside Diamater of the tube is 2" and the overall length of the tube is 15" not including the split nuts on each end. This comeplete heater includes M7 sensors, tailpieces, split-nuts and gaskets. Made for Balboa VS and Balboa SUV M7 control systems.
| Heater Application | Balboa Water Group |
| Heater Length | 15" |
| Heater Type | Flo Thru |
| Housing Configuration | Straight |
| Housing Diameter | 2" |
| Kilowatts | 1.0kW/4.0kW |
| Pressure Tap Orientation | None |
| Voltage | 115v/230v |
| Heater Inlet Size | 2" |
| Heater Inlet Type | Slip (s) |
| Heater Outlet Size | 2" |
| Heater Outlet Type | Slip (s) |
This heater is compatible with Balboa control systems with the following numbers:
| 52428, | 52428-01, | 52641-04, | 52641-05, | 52641-06, | 52641-07, | 52641-08, | 52641-09, |
54428,52428-01,52641-04,52641-06,52641-07,52641-08,52641-09
Related Products
Heater, Flo Thru, Balboa M7, 800, 825, 15" x 2", 230v or 115v , 4.0kW, with Sensors
MSRP:
$289.99
$219.99
This part is a complete Heater, Flo Thru, Balboa M7, 800, 825, 15" x 2", 230v or 115v , 4.0kW, with Sensors..
This heater tube has a stud on the top and bottom make sure yours has them too....
Heater, Flo Thru, Balboa, M7, 15" x 2", 230v or 115v, 5.5kW, with Sensors
MSRP:
$379.43
$224.99
Balboa Water GroupStainless steel replacement complete heater assembly, 5.5kW, 230v or 115V.Thie heater measures 2" Inside Diameter of the tube and the length of the tube is 15". Includes M7 sensors,...
Heater, Titanium Flo Thru, Balboa, M7, 15" x 2", 230v or 115v, 5.5kW, with Sensors
MSRP:
$299.95
$269.95
Balboa 5.5 KW Titanium heater assembly with stud. Can be run at 230 volts for the full 5.5 KW or at 115 volts for 1.5 KW. This Flo Thru heater has 2" unions that measure 3" on the inside and is 15"...
Heater, Flo Thru ,Dual Sensor M7, 15" x 2",230v ,4.0kW, Generic
MSRP:
$259.99
$209.99
Stainless steel aftermarket replacement heater assembly that comes with (2) M7 Sensors and and the Split Nuts and Gaskets.. It is a direct fit replacement for Most Balboa Systems with M7 Sensors...
Heater, Flo Thru, Balboa, LE, Value, M7, 15" x 2", 230v or 115v , 5.5kW, with (1) Sensor
MSRP:
$329.99
$229.99
Balboa Water GroupStainless steel replacement heater assembly, 5.5kW/230v, 2" x 15". Includes a pressure switch, Hi Limit Sensor on the right side. Made for Balboa Value and Balboa LE control systems...
Heater, Flo Thru, Balboa LE, Value, M7, 15" x 2", 230v or 115v , 5.5kW, with Sensor without Mounting Studs..
MSRP:
$279.99
$209.99
Flo Thru, Balboa LE, Value, M7, 15" x 2", 230v or 115v , 5.5kW, with Sensor without Mounting Studs.. Stainless steel replacement complete heater assembly, 5.5kW/1.375kW ,230v or 115v, this tube...
Heater, Flo Thru, Balboa, RS101, VS100, 10" x 2", 4.0kW, 230v
MSRP:
$339.99
$249.99
You are purchasing a New 115V or 230V 4.0kw VS100 or RS101 Balboa Spa Hot Tub Heater Assembly with Cord and M7 Sensors. This heater is found on some 115V or 230V Viking, RS101 Dream Maker Brand Hot...
Heater, Flo Thru, Sundance, 680 Series, Sweetwater, 15" x 2", 230v, 4.0kW, with Pinch Plate
MSRP:
$319.99
$219.99
This part is a 15" Heater Tube with a 4.0KW Heater in it that is found in some Sundance 680 Series tubs and some Sweetwater & Del Sol tubs as well with a High Flow .. For other parts related to...
Balboa 3.0 KW Heater, Flo Thru Heater, M7, Euro 50 Hz
MSRP:
$325.00
$265.99
Popular 3.0 KW flow thru 15" heater with stud made by Balboa for European and 50 Hz systems that utilize the M7 heater design. Can be found in the Balboa VS, GS and BP systems.
The assembly includes...