- Home
- O-Rings & Gaskets
- Pool Related O-Rings
- Gasket,StaRite Dura-Glas Generic,Pot to Volute, G-99R, Thick
Gasket,StaRite Dura-Glas Generic,Pot to Volute, G-99R, Thick
- SKU:
- HTP90-423-2098
- Shipping:
- Calculated at Checkout
MSRP:
$7.49
Now:
$5.82
Was:
— You save
$1.67
Related Products

Pump Shaft Seal PS-100 fits StaRite Max-E Glas or Dura Glas Pool Pump
MSRP:
$11.23
Now:
$8.73
Was:
This Seal is a PS-100 that fits a Starite Max-E Glas or Dura-Glas Swimming Pool Style Pump. This Seal is rarely found on Hot Tubs. Shaft Seal Head Type A Model PS-100 Quality/Material Good - Buna...


Gasket, AquaFlo A, Volute, 4-13/16"ID, 5-1/2"OD, Generic
MSRP:
$11.99
Now:
$8.99
Was:
This part is a Gasket for an AquaFlo A, Volute, 4-13/16"ID, 5-1/2"OD, Generic..
Part Type
Gasket


Drain Plug, Pentair StaRite IntelliPro
MSRP:
$9.99
Now:
$6.99
Was:
This item is a 1/2" Air Bleeder Plug with Fine threads that can be found on the Newer style of a Sta-Rite Dura-Jet DJ Series Wet ends only.
If you need the O-ring for this plug...


Impeller, StaRite, DuraJet, DJ, 3.0hp, 12.0 Amps
MSRP:
$47.99
Now:
$34.99
Was:
This part is a 3HP Sta-Rite DJ Dura-Jet Pump Impeller.. This impeller will usually have the number 17400-0135 cast into the back and will measure about 4 1/8" wide with an eye width of 1 3/4" and a...


Impeller, StaRite, DuraJet, DJ, 2.0hp, 10-11.0 Amps
MSRP:
$47.99
Now:
$34.99
Was:
This part is a 2HP Sta-Rite DJ Dura-Jet Pump Impeller.. This impeller will usually have the number 17400-0122 cast into the back and will measure about 3 3/4" wide with an eye width of 1 1 3/4" and a...

Impeller, StaRite, DuraJet, DJ, 2.5hp, Amp 11.0-12.0
MSRP:
$39.99
Now:
$34.99
Was:
This part is a 2.5HP Sta-Rite DJ Dura-Jet Pump Impeller.. This impeller will usually have the number 17400-0123 cast into the back and will measure about 3 3/4" wide with an eye width of 1 3/4" and a...


Drain Plug Pentair StaRite DuraJet DJ 1/4" Old Style Sta-Rite
MSRP:
$14.99
Now:
$12.99
Was:
This item is a 1/4" Air Bleeder Plug with coarse threads that can be found on the old style of a StaRite Dura-Jet DJ Series Wetends only. The head of this plug will break off and leave the threads in...


Wet End O-Ring 5-1/8" ID, 3/16" Cross Section Sta-Rite Starite Dura-Jet DJ Series
MSRP:
$8.99
Now:
$5.99
Was:
This O-Ring is 5 1/8" Inside Diameter and 3/16" wide and is used in many applications for Wet Ends between the Face and Volute or under a Trap Lid brands include Hayward, PacFab, Pentair, Sta-Rite in...

Volute O-Ring, 6" ID, 3/32" Thick, Vico Ultimax, 48 or 56 Frame
MSRP:
$11.99
Now:
$8.99
Was:
This part is a Volute O-Ring, 6" ID, 3/32" Thick, Vico Ultimax, 48 or 56 Frame...