Digital Control Systems and Parts

Topside adapter plate for the ACC Smartouch and Modpack KP1000, KP1000DP and the KP1005 models. This adapter plate will cover a larger hole when installing a new retro-fit control system upgrade. Outside Measurements = 9" x 4" Inside Measurements = 4.65"...

LZM1UR1(X) / LZM2UR1 circuit board for Marquis spas that have 2 pumps. This original circuit board may also have part number 54343 and the spa pack or box that houses the board 54342. Supports a 2 speed pump 1, single speed pump 2, 12 volt light and...

Transformer for Sundance and Jacuzzi based LX circuit boards. This 115/230 volt transformer has a step down voltage of 12 Volts. The purpose of this transformer is to energize the circuit board to power low voltage items like the processor, relay coils,...

Balboa BPBEE Control System with 4.0kW Remote Heater and TP200T Panel. Includes Blackout Plate, Hang Mounts, Topside and Light Wire..  You would reuse your amp cables for pumps and blowers.. If your original control used cords other than Amp Cables...

Balboa BPBEE Control System with 4.0kW Heater and TP200T Panel. Includes, Blackout Plate, Topside and Light Wire..   This system is compact and will run 1 or 2 Jet pumps or 1 Pump and a Blower and a Light..    You would reuse your amp...

The next generation feature rich Balboa BP7 control system with a 5.5KW heater bundled with the sleek rounded rectangle shaped 6 button TP600 topside control with large easy to read backlit LCD screen and simple to follow menus. Kit includes: system,...

This part is a Control System, Balboa, BP Series, BP2000G1, 5.5KW, 800 INC, BP2X, WiFi Capable   Unparalleled system reliability and innovative engineering. Utilizing higher resistant materials, the BP2000/2100 operates: 2-speed primary...

This part is a Circuit Board, Balboa, Replacement Board for COLE2PDVR1A ,ELE09100232, 8 Pin Phone Cable, Blower or Pump 3 Option requiring an additonal small board.. Additional Information 2-speed Pump 2 is required, uses X-P332 expander board. To add...

This part is a Circuit Board, Balboa, VS520SZ, Serial Standard, 8 Pin Phone Cable, Blower or Pump 3 Option..  Additional Information 2-speed Pump 2 is required, uses X-P332 expander board. To add Blower or 1-speed Pump 3, use J17/26. Cord...

6600-720 formerly 6600-046, 6600-287, Sundance Spas, Jacuzzi, Sweetwater circuit board, without Circ Pump Logic. This board does not operate a circulation pump.   If the spa does have a circulation pump, then use this board Circ Pump Version...

Sundance/Jacuzzi/Sweetwater Circuit Board w/Circ Pump Only, LX-15. Used on Sundance Spas and Jacuzzi Spas. Replaces, 6600-046 (with circ pump eprom), 6600-088, 6600-288, 6000-167. Comes with latest Eprom Revision 3.61+.   Circuit boards are a...

This Baptismal Auto Fill Kit, Hydroquip BES/BCS Series, w/ Interface Module, Water Level (Float) Assembly is manufactured by Hydro-Quip.  Hydro Quip Baptistery Equipment Auto Level Kit (FLOAT STYLE)   Kit Includes: Water Level...